From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stef Coene Date: Mon, 22 Dec 2003 16:03:27 +0000 Subject: Re: [LARTC] Simulation with Packet Lost and Packet Delays Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Sunday 21 December 2003 16:31, Tony Yat-Tung Cheung wrote: > Hi All, > > I would like to be able to simulate network congestion and delay on > tcp/udp connections between two hosts. I would need to simulate packet > lost and packet delay. > > I think I would need to use a Linux box with two network cards to act as > a pass-through ethernet bridge. Is it the case? Does this how-to guide > provides good information in this area? http://snad.ncsl.nist.gov/itg/nistnet/ Stef -- stef.coene@docum.org "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/