From mboxrd@z Thu Jan 1 00:00:00 1970 From: lethal weapon lethalwp@hotmail.com Date: Thu, 30 Nov 2000 12:25:32 +0000 Subject: [LARTC] balancing behind NAT? Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org 
Hi,

I'd like to setup cbq for my 7 lan users, but i'd like to do it only for the 
internet connect (LAN is accessing internet through masquerading), not for 
the whole server machine: i mean somebody on the lan should access the 
server at full rate(10Mbit/s), but internet at for example 30KB/sec).
i now i've setup only kbits, but those dramastic low-speed was to see easily 
if it was working or not :)

how could i do that?

my lan NIC is eth0 and internet eth1, i already tried the following thingie 
that doesn't work (i suppose it's logic, but i had to try it ;) )

And, How could i reset all the cbq existing config to remake a new one?

tc qdisc add dev eth1 root handle 10: cbq bandwidth 105Kbit avpkt 1000
tc class add dev eth1 parent 10:0 classid 10:1 cbq bandwidth 105Kbit rate \
   105Kbit allot 1514 weight 15Kbit prio 8 maxburst 20 avpkt 1000

tc class add dev eth1 parent 10:1 classid 10:100 cbq bandwidth 105Kbit rate 
\
   10Kbit allot 1514 weight 5Kbit prio 5 maxburst 20 avpkt 1000 bounded

tc qdisc add dev eth1 parent 10:100 sfq quantum 1514b perturb 15
tc qdisc add dev eth1 parent 10:200 sfq quantum 1514b perturb 15

tc filter add dev eth1 parent 10:0 protocol ip prio 25 u32 match ip dst \
    192.168.0.0/16 flowid 10:100



Same kind of thing for upstream

PS: where could i find a decent doc/faq/howto about cbq? Advanced-routing 
isn't that bad but it's far from explaining every little trick :/


Greetings,
          JY
_____________________________________________________________________________________
Get more from the Web.  FREE MSN Explorer download : http://explorer.msn.com