[LARTC] Traffic Shapping

[Bruno Maciel Fonseca bruno@avati.com.br]

<PRE>Hi Junus Junarto D,

	I still have the same problem of limiting the outgoing traffic.
	I'm limiting the incoming traffic perfectily with the script:

tc qdisc add dev eth1 root handle 1:0 cbq bandwidth 256Kbit avpkt 1000 cell 8
 
tc class add dev eth1 parent 1:0 classid 1:1 cbq bandwidth 256Kbit rate \ 
256Kbit weight 20Kbit prio 8 allot 1514 cell 8 maxburst 20 avpkt 1000
 
tc class add dev eth1 parent 1:1 classid 1:10 cbq bandwidth 256Kbit rate \ 
64Kbit weight 6Kbit prio 5 allot 1514 cell 8 maxburst 20 avpkt 1000 bounded
 
tc qdisc add dev eth1 parent 1:10 tbf rate 64Kbit buffer 10Kb/8 limit 15Kb \ 
mtu 1500
 
tc filter add dev eth1 parent 1:0 protocol ip prio 100 u32 match ip dst \
10.0.5.2 flowid 1:10                 

	But when I try to limit the incoming traffic I still have the same problem 
that it does not limit. And I still doesn't know why. I used your and my 
script and everything happens like there is no shaper...
	The outgoing traffic script is:

tc qdisc add dev eth0 root handle 2:0 cbq bandwidth 256Kbit avpkt 1000 \
cell 8

tc class add dev eth0 parent 2:0 classid 2:1 cbq bandwidth 256Kbit rate \
256Kbit weight 20Kbit prio 8 allot 1514 cell 8 maxburst 20 avpkt 1000

tc class add dev eth0 parent 2:1 classid 2:10 cbq bandwidth 256Kbit rate \
64Kbit weight 6Kbit prio 5 allot 1514 cell 8 maxburst 20 avpkt 1000
bounded

tc qdisc add dev eth0 parent 2:10 tbf rate 64Kbit buffer 10Kb/8 limit \
15Kb mtu 1500

tc filter add dev eth0 parent 2:0 protocol ip prio 100 u32 match ip src \
10.0.5.2 flowid 2:10

But, thanx a lot...

	Bruno


</PRE>