From mboxrd@z Thu Jan  1 00:00:00 1970
From: Tom Aernoudt tom.aernoudt@intec.rug.ac.be
Date: Wed, 17 Jan 2001 13:08:44 +0000
Subject: [LARTC] dscp marking
Message-Id: <marc-lartc-98373940416894@msgid-missing>
List-Id: <lartc.vger.kernel.org>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

<PRE>
I want to set the DSCP field of the incoming packets. And then put them
in the correct queues.


I can mark the packets:

    iptables -A OUTPUT -t mangle -d 10.10.10.12 -j MARK --set-mark 1

    tc qdisc add dev eth0 handle 1:0 dsmark indices 64 set_tc_index

    tc class change dev eth0 classid 1:1 dsmark mask 0x3 value 0xb8

    tc filter add dev eth0 parent 1:1 protocol ip prio 1 handle 1 fw
classid 1:1


Or i can set up the queues:

&lt;bigger&gt;  #setting root DSMARK

  #####################

  echo Setting up DSMARK

  $TC qdisc add dev $DEV root handle 1:0 dsmark indices 64 set_tc_index

  $TC filter add dev $DEV protocol ip parent 1:0 prio 1 \

      tcindex mask 0xfc shift 2 pass_on

  #setting root CBQ

  ##################

  echo Setting up root CBQ

  $TC qdisc add dev $DEV parent 1:0 handle 2:0 cbq bandwidth $BANDWIDTH
\

      avpkt 1000 cell 8 mpu 64

  $TC filter add dev $DEV parent 2:0 protocol ip prio 1 \

      tcindex mask 0xf0 shift 4 pass_on

  #setting EF

  ############

  echo Setting up EF

  $TC class add dev $DEV parent 2:0 classid 2:5 cbq bandwidth $BANDWIDTH
\

      rate $EF_RATE avpkt 1000 prio 1 bounded isolated allot 1514 \

      maxburst 10

  $TC qdisc add dev $DEV parent 2:5 pfifo limit 10

  $TC filter add dev $DEV parent 1:0 protocol ip prio 1 \

      handle 0x2e tcindex classid 1:51

  $TC filter add dev $DEV parent 2:0 prio 1 handle 5 tcindex classid 
2:5

  #setting BE

  ############

  echo Setting up BE

  $TC class add dev $DEV parent 2:0 classid 2:6 cbq bandwidth $BANDWIDTH
\ 

      rate $BE_RATE avpkt 1000 prio 6 allot 1514 maxburst 21

  $TC qdisc add dev $DEV parent 2:6 red limit 60KB min 15KB max 45KB \

      burst 20 avpkt 1000 bandwidth $BANDWIDTH probability 0.4

  $TC filter add dev $DEV parent 1:0 protocol ip prio 1 \

      handle 0x0 tcindex classid 2:161

  $TC filter add dev $DEV parent 2:0 protocol ip prio 1 \

      handle 6 tcindex classid 2:6

&lt;/bigger&gt;  


But I can't combine the two. What do I have to do to combine these 2?

I tried to do the marking at the ingress but that didn't work.


Thanks,

Tom Aernoudt


</PRE>