Re: [LARTC] Ideas...

[Jean-Francois Lemieux <jflemieux@yahoo.com>]

1-Control HTTP by a proxy, with URL and mime filtering
2-Use CBQ with u32 filter to control each workstation.
Also, you can use CSZ to minimize delay for
interactive protocol like IRC or telnet session. 
3-Use proxy for SMTP, POP3, to control how many times
theses protocol are used. (Ex: send all outgoing email
at each 20 minutes)

--- Errol Neal <eneal@bnbtv.com> wrote:
> 
> Hello,
> 
> My company runs several Internet Cafes in Mexico,
> where bandwith is
> limited and very costly. We use Linux to do NAT and
> firewall stuff and at
> each location we
> have about 30-40 stations. I'd like to know if
> anyone out there has any
> suggestions about how to use CBQ to limit the
> bandwith at each station.
> We only have a 128k circuit. The problem I am having
> is that since I have
> that tiny pipe, one or two people unknowingly hog
> all the bandwith with
> applications like napster and my other customers who
> are just viewing web
> pages get pissed. Again, I want to rate limit each
> individual station. Do
> I have to have an ingress rule for EACH ip address?
> Any ideas would be
> very helpful.. 
> 
> Thanks sincerely!
> 
> 
> Errol 
> 
> 
> 
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:
http://ds9a.nl/2.4Routing/


==---
Jean-Francois Lemieux
Consultant TI
MCJ Conseil Inc.

__________________________________________________
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail. 
http://personal.mail.yahoo.com/

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/