From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Christian Worm Mortensen" Date: Mon, 23 Apr 2001 06:24:13 +0000 Subject: Re: [LARTC] wrr/bandwith control in ppp0 Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hi, > is possible to setup any bandwith resource control in a ppp0 interface? I am almost sure that this is possible. > i'd like to distribute bandwith equally between pcs in a network, and > inside each pc, equally between protocols... is this possible? The example setup included with WRR should be appropriate. Inside each PC it will not distribute equally between protocols, though. It will use SFQ which distributes somewhat equally between sessions (which is probably what you want). > all the documentation refers to eth0 type interfaces... so? That's what most people use ;-) Christian _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/