From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alexandra Alvarado Date: Thu, 03 May 2001 11:30:16 +0000 Subject: Re: [LARTC] HOW CAN I PRIORITIZE THE ICMP PACKETS Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Thanks for try to help me, i apprecite so much this. Well this is my cbq.init configuration, how can modify this to priorize ICMP packets [ping service] Thanks Alexandra #!/bin/sh DEV="dev eth1" TTOPIC 7.100.136.194 MORTEG 7.100.136.208 MCADEN 7.100.136.233 KLAPEN 7.100.136.199 JSABAN 7.100.136.201 OTHERS 7.100.136.0/24 tc qdisc add $DEV root handle 10: cbq bandwidth 100Mbit avpkt 1000 tc class add $DEV parent 10:0 classid 10:1 cbq bandwidth 100Mbit rate 100Mbit allot 1514 weight 10Mbit prio 8 maxburst 20 avpkt 1000 tc class add $DEV parent 10:1 classid 10:100 cbq bandwidth 100Mbit rate 128Kbit allot 1514 weight 12Kbit prio 5 maxburst 20 avpkt 1000 bounded tc class add $DEV parent 10:100 classid 10:1000 cbq bandwidth 128Kbit rate 16Kbit allot 1514 weight 1Kbit prio 1 maxburst 20 avpkt 1000 bounded tc class add $DEV parent 10:100 classid 10:2000 cbq bandwidth 128Kbit rate 16Kbit allot 1514 weight 1Kbit prio 2 maxburst 20 avpkt 1000 bounded tc class add $DEV parent 10:100 classid 10:3000 cbq bandwidth 128Kbit rate 8Kbit allot 1514 weight 1Kbit prio 3 maxburst 20 avpkt 1000 bounded tc class add $DEV parent 10:100 classid 10:4000 cbq bandwidth 128Kbit rate 8Kbit allot 1514 weight 1Kbit prio 4 maxburst 20 avpkt 1000 bounded tc class add $DEV parent 10:100 classid 10:5000 cbq bandwidth 128Kbit rate 8Kbit allot 1514 weight 1Kbit prio 4 maxburst 20 avpkt 1000 bounded tc class add $DEV parent 10:100 classid 10:6000 cbq bandwidth 128Kbit rate 84Kbit allot 1514 weight 1Kbit prio 5 maxburst 20 avpkt 1000 bounded tc qdisc add $DEV parent 10:1000 tbf rate 16Kbit buffer 10Kb/8 limit 15Kb tc qdisc add $DEV parent 10:2000 tbf rate 16Kbit buffer 10Kb/8 limit 15Kb tc qdisc add $DEV parent 10:3000 tbf rate 16Kbit buffer 10Kb/8 limit 15Kb tc qdisc add $DEV parent 10:4000 tbf rate 16Kbit buffer 10Kb/8 limit 15Kb tc qdisc add $DEV parent 10:5000 tbf rate 16Kbit buffer 10Kb/8 limit 15Kb tc qdisc add $DEV parent 10:6000 tbf rate 16Kbit buffer 10Kb/8 limit 15Kb tc filter add $DEV parent 10:0 protocol ip prio 25 u32 match ip dst $TTOPIC flowid 10:1000 tc filter add $DEV parent 10:0 protocol ip prio 25 u32 match ip dst $MORTEG flowid 10:2000 tc filter add $DEV parent 10:0 protocol ip prio 100 u32 match ip dst $MCADEN flowid 10:3000 tc filter add $DEV parent 10:0 protocol ip prio 100 u32 match ip dst $KLAPEN flowid 10:4000 tc filter add $DEV parent 10:0 protocol ip prio 100 u32 match ip dst $JSABAN flowid 10:5000 tc filter add $DEV parent 10:0 protocol ip prio 100 u32 match ip dst $OTHERS flowid 10:6000 "Wingtung.Leung" wrote: > > On Thu, 3 May 2001, Alexandra Alvarado wrote: > > > Obviously this occur when I configure the cbq [64Kbit], when i turn cbq > > off all is ok, BUT I NEED CONTROL THE BANDWITH all traffic minus the > > ping service. > > > > That is the reason why I need that the ping service not be controlled > > [or be prioritized], FOR THE CLIENTS, can you give me a good example for > > that? :) > > It depends how you select your pakkets for putting in the bandwidth > limited queues. Just don't mark the ICMP packets or adjust the filter > so they have enough bandwidth. Or create a seperate class for ICMP > messages. > > Please be more specific .. > > -- > CAPS = SHOUTING = (maybe) impolite > > _______________________________________________ > LARTC mailing list / LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/