From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mike Fedyk Date: Fri, 11 May 2001 01:24:18 +0000 Subject: Re: [LARTC] Authetication on LAN Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Thu, May 10, 2001 at 09:15:56PM -0400, Michael T. Babcock wrote: > On 10 May 2001 18:10:43 -0700, Mike Fedyk wrote: > > Ahh, but now we are talking about a non-transparent setup. I want something > > where it will work with any TCP/IP device without any setup besides setting > > IP and routing. > > > > I'd like to see something that can identify which user is using each > > connection, and not need anything more than an identd. This would enable > > access for that ip/port as needed at layer 3/4. > > I'm not aware of one, but it shouldn't be too hard to write a program > that would watch for outgoing connections via netlink (Linux) or some > such device and request ident information about that user before > deciding to allow or deny the request. > > One might exist. What level of programming would it require? Perl, shell or C? Mike _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/