From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jaco van der Schyff Date: Mon, 21 May 2001 07:43:08 +0000 Subject: [LARTC] How to specify bandwidth Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Greetings, I have a quick question as how to specify bandwith on my eth0 device. I have a cisco router connected to eth0, and the cisco router is connected to our ISP via a 320Kbps link. When I specify the bandwith in tc, do I specify it as 320Kbps (the bandwidth of the internet link) or as 100Mbps (the bandwidth available on eth0) And the same question as to the bandwidth on eth1 (link to lan). Should that also be 320kbps or 100mbps? Any help would be greatly appreciated. - Jaco van der Schyff jvds@netgroup.co.za _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/