From mboxrd@z Thu Jan  1 00:00:00 1970
From: Jaco van der Schyff <jvds@netgroup.co.za>
Date: Mon, 21 May 2001 13:22:18 +0000
Subject: [LARTC] Three ethernet cards?
Message-Id: <marc-lartc-99045122001032@msgid-missing>
List-Id: <lartc.vger.kernel.org>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

Hi,

I have a slight problem, is it possible to shape
bandwidth over more than one interface.

I have a linux box with eth0 going to a cisco router,
I want to shape bandwith to eth1 and eth2
eth1 goes to the lan, and eth2 to a DMZ.

How can I accomplish this, so that I can shape
the same bandwith to the DMZ and the lan?
(their bandwith should be shared) ?


                            /eth1 (to local LAN)
                           /
                          /
                         /
          |-------------|
eth0      |             |
-----------             |
to        |             |
internet  |-------------| 
                        \
                         \
                          \
                           \ eth2 (to DMZ)






btw. Thanks for all the help on my previous posts

- Jaco van der Schyff
  jvds@netgroup.co.za

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/