From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Wingtung.Leung" Date: Mon, 21 May 2001 16:25:56 +0000 Subject: Re: [LARTC] Three ethernet cards? Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Mon, 21 May 2001, Jaco van der Schyff wrote: > I have a slight problem, is it possible to shape > bandwidth over more than one interface. Yes. > I have a linux box with eth0 going to a cisco router, > I want to shape bandwith to eth1 and eth2 > eth1 goes to the lan, and eth2 to a DMZ. > > How can I accomplish this, so that I can shape > the same bandwith to the DMZ and the lan? > (their bandwith should be shared) ? > > > /eth1 (to local LAN) > / > / > / > |-------------| > eth0 | | > ----------- | > to | | > internet |-------------| > \ > \ > \ > \ eth2 (to DMZ) > Just create seperate classes and queueing disciplines for each interface. And please read the example in the HOWTO, and try to ask more specific questions. _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/