Re: [LARTC] Three ethernet cards?

[Jaco van der Schyff <jvds@netgroup.co.za>]

> As per my knowledge borrowing bandwidth between cards is not possible as a
> seperate Hierarchy would exist for each interface. Within a hierarchy
> borrowing/sharing  bandwidth between classes is possible.

iow, It is not possible, to shape the incoming bandwith out to two
networks on sperate NICs?


- Jaco

Deepak singhal wrote:
> 
> ----- Original Message -----
> From: "Vladimir Smelhaus" <smelhaus@bpt.cz>
> To: "Deepak singhal" <dsinghal@spacewayindia.com>
> Sent: Tuesday, May 22, 2001 10:58 AM
> Subject: Re: [LARTC] Three ethernet cards?
> 
> > Dne 22 May 2001, v 10:18, Deepak singhal napsal(a):
> >
> > > Ya !! sure it is possible to shape bandwidth on more than one
> > > interface. For e.g. in CBQ whenever u shape bandwidth i.e. when we
> > > apply the rules we also specify to what interface these rules are
> > > applied . So for each interface u have , u specify the bandwidth
> > > policy to be applied.
> >
> > And what about to borrow bandwidth between three cards ?
> 
> As per my knowledge borrowing bandwidth between cards is not possible as a
> seperate Hierarchy would exist for each interface. Within a hierarchy
> borrowing/sharing  bandwidth between classes is possible.
> 
> Deepak
> >
> > Zdravim/Regards
> >
> >      Vladimir Smelhaus
> >
>

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/