FW: Re: [LARTC] How to use tc to limit bandwidth of a special IP in LAN

["Daniel Bergqvist" <daniel@netatonce.se>]

Due to the lack of documentation for TC, I have started to write a TC
command reference. It's not finished but maybe you will find it usefull.

http://linux.bergqvist.se/tc/

Regards,
Daniel


-----Original Message-----
From: lartc-admin@mailman.ds9a.nl [mailto:lartc-admin@mailman.ds9a.nl]On
Behalf Of Ramin Alidousti
Sent: Thursday, June 14, 2001 5:18 AM
To: Jeffrey W. Baker
Cc: streeterk; Linux Advanced Routing
Subject: Re: Re: [LARTC] How to use tc to limit bandwidth of a special IP in
LAN

On Wed, Jun 13, 2001 at 07:10:00PM -0700, Jeffrey W. Baker wrote:

Yes. I have these .tex files as well. Much beter than scanning through the
source code...

"ip" is kind of easy to follow (maybe because I already know what I'm
looking
for) but when it comes down to "tc", my head spins. Take the following
(easy)
example:

tc class add dev eth1 parent 1:1 classid 1:2 cbq bandwidth 10Mbit rate 1Mbit
\
allot 1514 cell 8 weight 100Kbit prio 3 maxburst 20 avpkt 1000 split 1:0 \
defmap c0

A small note on all these options would have saved me a lot of guess-work.

But anyway, don't take me wrong. I think that iproute2 is one of the coolest
networking tools I've ever seen.

Ramin

>
> -jwb

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:
http://ds9a.nl/2.4Routing/


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/