From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stef Coene Date: Fri, 11 May 2001 06:20:05 +0000 Subject: Re: [LARTC] CBQ question Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Gery Kahn wrote: > > Please. > I create simple config. > > CBQ > | > class > | | > class1 class2 > > when rate of class1 is high for the rate of class2, > finaly rate of class2 exceed the given. > My experiments gives for example if > class1 rate = 90Mbit and class2 rate = 10Mbit so > actual rate of class2 can be from 11.4 to 12.5 ( and far more ). I tested it also and when you give 1 class more than 75% of bandwidth, it gets less than that. I have tests-results on my website to prove it. A better setup is this : CBQ | class | qdisc | | class1 class2 -- Stef More QOS info : http://users.belgacom.net/staf/ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/