From mboxrd@z Thu Jan 1 00:00:00 1970 From: Juri Haberland Date: Mon, 09 Jul 2001 09:30:36 +0000 Subject: Re: [LARTC] What type of machine to do routing ? Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Franck BALAZOT wrote: > > In fact I want to manage the bandwitdth with Class Based Queueing with iproute2. > Perharps a 100Mhz CPU isn't powerfull enough ? I'm not quite sure but it could work. If you intend to by a new computer than any will do (assuming that you cannot by anything less than a PI-233)... > Juri Haberland wrote: > > > Franck BALAZOT wrote: > > > > > > Hi all, > > > > > > I need to do traffic control on a 2 Mbit/s link with 100 users on the > > > LAN. > > > > > > What machine do I need (CPU, RAM, HDD) ? > > > > If you only want to do (static) routing without firewalling/NAT then an > > old Pentium 100MHz with 64MB should do it. Concerning the HDD: get the > > smallest you can buy nowadays. Cheers, Juri _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/