From mboxrd@z Thu Jan 1 00:00:00 1970 From: "macca@inwind.it" Date: Fri, 13 Jul 2001 14:37:39 +0000 Subject: Ri:Re: [LARTC] How to del the filter? Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org > ---------- Initial message ----------- > > From : lartc-admin@mailman.ds9a.nl > To : > Cc : > Date : Fri, 13 Jul 2001 15:41:02 +0200 > Subject : Re: [LARTC] How to del the filter? > > In order to delete a filter, the prio value is important . If I don't > remember too bad , if you type > > # tc filter del dev eth0 parent 1:0 prio 100 > > you should be done. > Bewary : all filters which match such description will be erased, regardless > of other parameters such fmark/u32/etc. > > God Saves Tc ok it's right!!!!!!!!!!Thanks Jose One question before to del i write: [root@deis21 PROVE IPROUTE]# tc filter show dev eth0 filter parent 1: protocol ip pref 100 u32 filter parent 1: protocol ip pref 100 u32 fh 800: ht divisor 1 filter parent 1: protocol ip pref 100 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:1 match c0a80102/ffffffff at 16 it's normal there is wrote "pref" and not prio? I had created only one filter, why there is wrote 3 line, that means that trere are 3 filter or is the same filter! Thanks _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/