#!/usr/bin/perl

# udev-test
#
# Provides automated testing of the udev binary.
# The whole test is self contained in this file, except the matching sysfs tree.
# Simply extend the @tests array, to add a new test variant.
#
# Every test is driven by its own temporary config file.
# This program prepares the environment, creates the config and calls udev.
#
# udev reads the config, looks at the provided sysfs and
# first creates and then removes the device node.
# After creation and removal the result is checked against the
# expected value and the result is printed.
#
# happy testing,
# Kay Sievers <kay.sievers@vrfy.org>, 2003


use warnings;
use strict;

my $PWD = `pwd`;
chomp($PWD);

my $sysfs     = "sys/";
my $udev_bin  = "../udev";
my $udev_root = "udev-root/"; # !!! directory will be removed !!!
my $udev_db   = "udev.tdb";
my $perm      = "udev.permissions";
my $conf_tmp  = "udev-test.config";


my @tests = (
	{
		desc     => "label test of scsi disc",
		subsys   => "block",
		devpath  => "block/sda",
		expected => "boot_disk" ,
		conf     => <<EOF
LABEL, BUS="scsi", vendor="IBM-ESXS", NAME="boot_disk%n"
REPLACE, KERNEL="ttyUSB0", NAME="visor""
EOF
	},
	{
		desc     => "label test of scsi partition",
		subsys   => "block",
		devpath  => "block/sda/sda1",
		expected => "boot_disk1" ,
		conf     => <<EOF
LABEL, BUS="scsi", vendor="IBM-ESXS", NAME="boot_disk%n"
EOF
	},
	{
		desc     => "replace kernel name",
		subsys   => "tty",
		devpath  => "class/tty/ttyUSB0",
		expected => "visor" ,
		conf     => <<EOF
REPLACE, KERNEL="ttyUSB0", NAME="visor"
EOF
	},
	{
		desc     => "place on bus of scsi partition",
		subsys   => "block",
		devpath  => "block/sda/sda3",
		expected => "first_disk3" ,
		conf     => <<EOF
TOPOLOGY, BUS="scsi", PLACE="0:0:0:0", NAME="first_disk%n"
EOF
	},
	{
		desc     => "test NAME substitution chars",
		subsys   => "block",
		devpath  => "block/sda/sda3",
		expected => "Major:8:minor:3:kernelnumber:3:bus:0:0:0:0" ,
		conf     => <<EOF
TOPOLOGY, BUS="scsi", PLACE="0:0:0:0", NAME="Major:%M:minor:%m:kernelnumber:%n:bus:%b"
EOF
	},
	{
		desc     => "callout result subtitution, only last should match",
		subsys   => "block",
		devpath  => "block/sda/sda3",
		expected => "special-device-3" ,
		conf     => <<EOF
CALLOUT, BUS="scsi", PROGRAM="/bin/echo -n special-device", ID="-special-*", NAME="%c-1-%n"
CALLOUT, BUS="scsi", PROGRAM="/bin/echo -n special-device", ID="special--*", NAME="%c-2-%n"
CALLOUT, BUS="scsi", PROGRAM="/bin/echo -n special-device", ID="special-device-", NAME="%c-3-%n"
CALLOUT, BUS="scsi", PROGRAM="/bin/echo -n special-device", ID="special-devic", NAME="%c-4-%n"
CALLOUT, BUS="scsi", PROGRAM="/bin/echo -n special-device", ID="special-*", NAME="%c-%n"
EOF
	},
);

# set env
$ENV{UDEV_TEST} = "yes";
$ENV{SYSFS_PATH} = $sysfs;
$ENV{UDEV_CONFIG_DIR} = "./";
$ENV{UDEV_ROOT} = $udev_root;
$ENV{UDEV_DB} = $udev_db;
$ENV{UDEV_PERMISSION_FILE} = $perm;


sub udev {
	my ($action, $subsys, $devpath, $config) = @_;

	$ENV{DEVPATH} = $devpath;
	$ENV{UDEV_CONFIG_FILE} = $conf_tmp;

	# create temporary config
	open CONF, ">$conf_tmp" || die "unable to create config file: $conf_tmp";
	print CONF $$config;
	close CONF;

	$ENV{ACTION} = $action;
	system("$udev_bin $subsys");
}


# prepare
system("rm -rf $udev_root");
mkdir($udev_root) || die "unable to create udev_root: $udev_root\n";

# test
my $error;
print "\nudev-test will run ".($#tests + 1)." tests:\n\n";

foreach my $config (@tests) {
	$config->{conf} =~ m/^([A-Z]*).*/;
	my $method  = $1;

	print "TEST: $config->{desc}\n";
	print "method \'$method\' for \'$config->{devpath}\' expecting node \'$config->{expected}\'\n";

	udev("add", $config->{subsys}, $config->{devpath}, \$config->{conf});
	if (-e "$PWD/$udev_root$config->{expected}") {
		print "add: ok    ";
	} else {
		print "add: error\n";
		system("tree $udev_root");
		print "\n";
		$error++;
		next;
	}

	udev("remove", $config->{subsys}, $config->{devpath}, \$config->{conf});
	if (-e "$PWD/$udev_root$config->{expected}") {
		print "remove: error\n\n";
		system("tree $udev_root");
		$error++;
	} else {
		print "remove: ok\n\n";
	}
}

print "$error errors occured\n\n";

# cleanup
system("rm -rf $udev_root");
unlink($conf_tmp);
unlink($udev_db);