From: Matthew Wilcox <willy@debian.org>
To: linux-ia64@vger.kernel.org
Subject: Re: [DMESG] cpumask_t in action
Date: Thu, 06 Nov 2003 16:51:59 +0000 [thread overview]
Message-ID: <marc-linux-ia64-106813793102724@msgid-missing> (raw)
In-Reply-To: <marc-linux-ia64-106807117402763@msgid-missing>
On Wed, Nov 05, 2003 at 02:22:02PM -0800, Jesse Barnes wrote:
> I'm Cc'ing linux-ia64 because I think we have a lot of boot messages to
> cleanup in arch/ia64...
I agree. I've booted on 16 way machines and been annoyed by the kernel
messages. Did you set the dmesg buffer size to 128k or did you capture
the boot messages with a serial card?
The arch/ia64 code is not the only offender; ACPI is terribly verbose too.
I'm going to cc the acpi list too. See comments below.
> ACPI: SRAT Processor (id[0x00] eid[0x00]) in proximity domain 0 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x00]) in proximity domain 0 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x02]) in proximity domain 1 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x02]) in proximity domain 1 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x04]) in proximity domain 2 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x04]) in proximity domain 2 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x06]) in proximity domain 3 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x06]) in proximity domain 3 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x08]) in proximity domain 4 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x08]) in proximity domain 4 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x0a]) in proximity domain 5 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x0a]) in proximity domain 5 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x0c]) in proximity domain 6 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x0c]) in proximity domain 6 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x0e]) in proximity domain 7 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x0e]) in proximity domain 7 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x10]) in proximity domain 8 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x10]) in proximity domain 8 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x12]) in proximity domain 9 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x12]) in proximity domain 9 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x14]) in proximity domain 10 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x14]) in proximity domain 10 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x16]) in proximity domain 11 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x16]) in proximity domain 11 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x18]) in proximity domain 12 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x18]) in proximity domain 12 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x1a]) in proximity domain 13 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x1a]) in proximity domain 13 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x1c]) in proximity domain 14 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x1c]) in proximity domain 14 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x1e]) in proximity domain 15 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x1e]) in proximity domain 15 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x20]) in proximity domain 16 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x20]) in proximity domain 16 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x22]) in proximity domain 17 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x22]) in proximity domain 17 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x24]) in proximity domain 18 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x24]) in proximity domain 18 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x26]) in proximity domain 19 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x26]) in proximity domain 19 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x28]) in proximity domain 20 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x28]) in proximity domain 20 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x2a]) in proximity domain 21 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x2a]) in proximity domain 21 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x2c]) in proximity domain 22 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x2c]) in proximity domain 22 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x2e]) in proximity domain 23 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x2e]) in proximity domain 23 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x30]) in proximity domain 24 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x30]) in proximity domain 24 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x32]) in proximity domain 25 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x32]) in proximity domain 25 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x34]) in proximity domain 26 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x34]) in proximity domain 26 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x36]) in proximity domain 27 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x36]) in proximity domain 27 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x38]) in proximity domain 28 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x38]) in proximity domain 28 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x3a]) in proximity domain 29 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x3a]) in proximity domain 29 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x3c]) in proximity domain 30 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x3c]) in proximity domain 30 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x3e]) in proximity domain 31 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x3e]) in proximity domain 31 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x40]) in proximity domain 32 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x40]) in proximity domain 32 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x42]) in proximity domain 33 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x42]) in proximity domain 33 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x44]) in proximity domain 34 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x44]) in proximity domain 34 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x46]) in proximity domain 35 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x46]) in proximity domain 35 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x48]) in proximity domain 36 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x48]) in proximity domain 36 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x4a]) in proximity domain 37 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x4a]) in proximity domain 37 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x4c]) in proximity domain 38 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x4c]) in proximity domain 38 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x4e]) in proximity domain 39 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x4e]) in proximity domain 39 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x50]) in proximity domain 40 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x50]) in proximity domain 40 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x52]) in proximity domain 41 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x52]) in proximity domain 41 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x54]) in proximity domain 42 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x54]) in proximity domain 42 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x56]) in proximity domain 43 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x56]) in proximity domain 43 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x58]) in proximity domain 44 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x58]) in proximity domain 44 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x5a]) in proximity domain 45 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x5a]) in proximity domain 45 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x5c]) in proximity domain 46 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x5c]) in proximity domain 46 enabled
> ACPI: SRAT Processor (id[0x00] eid[0x5e]) in proximity domain 47 enabled
> ACPI: SRAT Processor (id[0x20] eid[0x5e]) in proximity domain 47 enabled
... for example ;-) 96 lines which honestly tell me nothing.
> ACPI: SRAT Memory (0x0000003000000000 length 0x0000001000000000 type 0x1) in proximity domain 0 enabled
> ACPI: SRAT Memory (0x000000b000000000 length 0x0000001000000000 type 0x1) in proximity domain 1 enabled
[ snip 44 lines ]
> ACPI: SRAT Memory (0x0000173000000000 length 0x0000001000000000 type 0x1) in proximity domain 46 enabled
> ACPI: SRAT Memory (0x000017b000000000 length 0x0000001000000000 type 0x1) in proximity domain 47 enabled
... and again.
> CPU 0: 61 virtual and 50 physical address bits
> ACPI: Local APIC address 0xc0000000fee00000
> ACPI: LSAPIC (acpi_id[0x00] lsapic_id[0x00] lsapic_eid[0x00] enabled)
> CPU 0 (0x0000) enabled (BSP)
> ACPI: LSAPIC (acpi_id[0x01] lsapic_id[0x20] lsapic_eid[0x00] enabled)
> CPU 1 (0x2000) enabled
> ACPI: LSAPIC (acpi_id[0x02] lsapic_id[0x00] lsapic_eid[0x02] enabled)
> CPU 2 (0x0002) enabled
> ACPI: LSAPIC (acpi_id[0x03] lsapic_id[0x20] lsapic_eid[0x02] enabled)
> CPU 3 (0x2002) enabled
[ snip 180 lines ]
> ACPI: LSAPIC (acpi_id[0x5e] lsapic_id[0x00] lsapic_eid[0x5e] enabled)
> CPU 94 (0x005e) enabled
> ACPI: LSAPIC (acpi_id[0x5f] lsapic_id[0x20] lsapic_eid[0x5e] enabled)
> CPU 95 (0x205e) enabled
The information here, such as it is seems to be a duplicate of the SRAT
information above.
> Boot processor id 0x0/0x0
> task migration cache decay timeout: 10 msecs.
> Starting migration thread for cpu 0
> Bringing up 1
> Processor 8192/1 is spinning up...
> CPU 1: 61 virtual and 50 physical address bits
> CPU 1: nasid 0, slice 2, cnode 0
> CPU 1: base freq 0.000MHz, ITC ratio\x15/2, ITC freq\x1500.000MHz+/--1ppm
> Calibrating delay loop... 2232.84 BogoMIPS
> CPU1: CPU has booted.
> Processor 1 has spun up...
> CPU 1 IS NOW UP!
> Starting migration thread for cpu 1
> Bringing up 2
> Processor 2/2 is spinning up...
> CPU 2: 61 virtual and 50 physical address bits
> CPU 2: nasid 2, slice 0, cnode 1
> CPU 2: base freq 0.000MHz, ITC ratio\x15/2, ITC freq\x1500.000MHz+/--1ppm
> Calibrating delay loop... 2241.08 BogoMIPS
> CPU2: CPU has booted.
> Processor 2 has spun up...
> CPU 2 IS NOW UP!
> Starting migration thread for cpu 2
There's a number of things here that annoy me. One is the stupid
"Processor 8192/1 is spinning up". I would expect "Processor 2/96
is spinning up", but why have this line at all? I'd also like to see
"Bringing up 3", "Processor 1 has spun up..." and "CPU 1 IS NOW UP!" go
away. That'd cut us down to:
> CPU 3: 61 virtual and 50 physical address bits
> CPU 3: nasid 2, slice 2, cnode 1
> CPU 3: base freq 0.000MHz, ITC ratio\x15/2, ITC freq\x1500.000MHz+/--1ppm
> Calibrating delay loop... 2241.08 BogoMIPS
> CPU3: CPU has booted.
> Starting migration thread for cpu 3
A 40% reduction in per-cpu verbosity ;-)
[920 lines deleted]
> CPUS done 128
> Total of 96 processors activated (213739.60 BogoMIPS).
> NET: Registered protocol family 16
[96 lines which aren't too dissimilar to my K6 box deleted ;-)
--
"It's not Hollywood. War is real, war is primarily not about defeat or
victory, it is about death. I've seen thousands and thousands of dead bodies.
Do you think I want to have an academic debate on this subject?" -- Robert Fisk
next prev parent reply other threads:[~2003-11-06 16:51 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-11-05 22:22 [DMESG] cpumask_t in action Jesse Barnes
2003-11-05 23:18 ` Chen, Kenneth W
2003-11-06 16:51 ` Matthew Wilcox [this message]
2003-11-06 17:20 ` Jesse Barnes
2003-11-06 17:23 ` Jesse Barnes
2003-11-06 18:56 ` Luck, Tony
2003-11-06 20:11 ` Jes Sorensen
2003-11-06 20:31 ` Robin Holt
2003-11-07 2:06 ` Paul Jackson
2003-11-07 8:13 ` Sylvain Jeaugey
2003-11-07 17:24 ` Matthew Wilcox
2003-11-10 8:26 ` Jes Sorensen
-- strict thread matches above, loose matches on Subject: below --
2003-11-06 18:56 Luck, Tony
2003-11-06 20:31 ` Robin Holt
2003-11-07 2:06 ` Paul Jackson
2003-11-06 17:09 Daniel Blueman
2003-11-05 23:18 Chen, Kenneth W
2003-11-05 23:24 ` Jesse Barnes
2003-11-05 23:42 ` Antonio Vargas
2003-11-06 4:36 ` Jesse Barnes
2003-11-05 22:22 Jesse Barnes
2003-11-05 22:49 ` Jesse Barnes
2003-11-05 23:56 ` Peter Chubb
[not found] ` <20031105222202.GA24119-sJ/iWh9BUns@public.gmane.org>
2003-11-06 16:51 ` Matthew Wilcox
2003-11-06 16:51 ` Matthew Wilcox
[not found] ` <20031106165159.GE26869-+pPCBgu9SkPzIGdyhVEDUDl5KyyQGfY2kSSpQ9I8OhVaa/9Udqfwiw@public.gmane.org>
2003-11-06 17:20 ` Jesse Barnes
2003-11-06 17:20 ` Jesse Barnes
2003-11-06 17:23 ` Jesse Barnes
2003-11-06 17:23 ` Jesse Barnes
2003-11-06 20:11 ` Jes Sorensen
2003-11-06 20:11 ` Jes Sorensen
2003-11-07 8:13 ` Sylvain Jeaugey
2003-11-07 8:13 ` Sylvain Jeaugey
[not found] ` <Pine.LNX.4.44.0311070907020.29453-100000-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2003-11-07 17:24 ` Matthew Wilcox
2003-11-07 17:24 ` Matthew Wilcox
2003-11-10 8:26 ` Jes Sorensen
2003-11-10 8:26 ` Jes Sorensen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-linux-ia64-106813793102724@msgid-missing \
--to=willy@debian.org \
--cc=linux-ia64@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.