From: Andreas Schwab <schwab@suse.de>
To: linux-ia64@vger.kernel.org
Subject: drivers/usb/core/config.c: invalid configuration descriptor
Date: Wed, 12 Nov 2003 15:37:24 +0000 [thread overview]
Message-ID: <marc-linux-ia64-106865176701709@msgid-missing> (raw)
When I try to run 2.6.0-test9 on an HP Everest I can't get USB working.
All I get is this:
drivers/usb/core/usb.c: registered new driver hub
PCI: Found IRQ 52 for device 0000:01:04.0
IOSAPIC: vector 52 -> CPU 0x0200, enabled
ohci_hcd 0000:01:04.0: OHCI Host Controller
ohci_hcd 0000:01:04.0: irq 52, pci mem c000000088032000
ohci_hcd 0000:01:04.0: new USB bus registered, assigned bus number 1
drivers/usb/core/config.c: invalid configuration descriptor
usb usb1: can't read configurations, error -22
ohci_hcd 0000:01:04.0: can't register root hub for usb1, -22
ohci_hcd 0000:01:04.0: can't start
ohci_hcd 0000:01:04.0: remove, state 0
ohci_hcd 0000:01:04.0: USB bus 1 deregistered
ohci_hcd: probe of 0000:01:04.0 failed with error -16
PCI: Found IRQ 53 for device 0000:01:04.1
IOSAPIC: vector 53 -> CPU 0x0300, enabled
ohci_hcd 0000:01:04.1: OHCI Host Controller
ohci_hcd 0000:01:04.1: irq 53, pci mem c000000088031000
ohci_hcd 0000:01:04.1: new USB bus registered, assigned bus number 1
drivers/usb/core/config.c: invalid configuration descriptor
usb usb1: can't read configurations, error -22
ohci_hcd 0000:01:04.1: can't register root hub for usb1, -22
ohci_hcd 0000:01:04.1: can't start
ohci_hcd 0000:01:04.1: remove, state 0
ohci_hcd 0000:01:04.1: USB bus 1 deregistered
ohci_hcd: probe of 0000:01:04.1 failed with error -16
PCI: Found IRQ 54 for device 0000:01:04.2
IOSAPIC: vector 54 -> CPU 0x0000, enabled
ehci_hcd 0000:01:04.2: EHCI Host Controller
ehci_hcd 0000:01:04.2: irq 54, pci mem c000000088030000
ehci_hcd 0000:01:04.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:01:04.2: USB 2.0 enabled, EHCI 0.95, driver 2003-Jun-13
drivers/usb/core/config.c: invalid configuration descriptor
usb usb1: can't read configurations, error -22
ehci_hcd 0000:01:04.2: can't register root hub for usb1, -22
ehci_hcd 0000:01:04.2: remove, state 0
modprobe[987]: NaT consumption 17179869216 [1]
Pid: 987, CPU 1, comm: modprobe
psr : 0000101008022018 ifs : 8000000000000690 ip : [<a000000200178440>] Not tainted
ip is at scan_async+0xa0/0x340 [ehci_hcd]
unat: 0000000000000000 pfs : 0000000000000308 rsc : 0000000000000003
rnat: fffffffff5955559 bsps: a000000100306e70 pr : fffffffff5952659
ldrs: 0000000000000000 ccv : 0000000000000000 fpsr: 0009804c8a70433f
csd : 0000000000000000 ssd : 0000000000000000
b0 : a00000020017dbe0 b6 : a000000100002d70 b7 : a000000100174fe0
f6 : 000000000000000000000 f7 : 0ffdca200000000000000
f8 : 100028000000000000000 f9 : 10002a000000000000000
f10 : 0fffeccccccccc8c00000 f11 : 1003e0000000000000000
r1 : a000000200370000 r2 : 0000000000000000 r3 : 0000000000000000
r8 : 0000000000000000 r9 : 0000000000000000 r10 : 0000000000000000
r11 : 0000000000000050 r12 : e00000087d147da0 r13 : e00000087d140000
r14 : 0000000000000001 r15 : 0000000000000000 r16 : a0000001007000c8
r17 : 0000000000002d35 r18 : 0000000000000001 r19 : 0000000000000000
r20 : e0000008721a5780 r21 : e0000040fa7305a8 r22 : a0000001007000c8
r23 : e0000040fa7306a8 r24 : e0000040fa7306a0 r25 : 0000000000000008
r26 : 0000000000000000 r27 : a0000001007000d8 r28 : a00000020017d170
r29 : a0000001007a7d20 r30 : 0000000000000000 r31 : e00000087dcca800
Call Trace:
[<a00000010001afc0>] show_stack+0x80/0xa0
spà0000087d147900 bspà0000087d1413c8
[<a00000010003f040>] die+0x180/0x220
spà0000087d147ad0 bspà0000087d141390
[<a00000010003fd30>] ia64_fault+0x110/0xa40
spà0000087d147ad0 bspà0000087d141348
[<a000000100013040>] ia64_leave_kernel+0x0/0x260
spà0000087d147bd0 bspà0000087d141348
[<a000000200178440>] scan_async+0xa0/0x340 [ehci_hcd]
spà0000087d147da0 bspà0000087d1412c8
[<a00000020017dbe0>] ehci_work+0x80/0x240 [ehci_hcd]
spà0000087d147da0 bspà0000087d141298
[<a00000020017d1b0>] ehci_stop+0x250/0x460 [ehci_hcd]
spà0000087d147da0 bspà0000087d141268
[<a000000200469e30>] usb_hcd_pci_remove+0x170/0x3c0 [usbcore]
spà0000087d147df0 bspà0000087d141228
[<a000000200469c20>] usb_hcd_pci_probe+0x8a0/0x940 [usbcore]
spà0000087d147e00 bspà0000087d141198
[<a00000010026c9c0>] pci_device_probe_static+0xc0/0x120
spà0000087d147e10 bspà0000087d141168
[<a00000010026cac0>] __pci_device_probe+0xa0/0xe0
spà0000087d147e10 bspà0000087d141140
[<a00000010026cb50>] pci_device_probe+0x50/0xa0
spà0000087d147e10 bspà0000087d141118
[<a00000010030d7a0>] bus_match+0xc0/0x120
spà0000087d147e10 bspà0000087d1410e0
[<a00000010030db00>] driver_attach+0x120/0x1e0
spà0000087d147e10 bspà0000087d1410a8
[<a00000010030e200>] bus_add_driver+0x100/0x1a0
spà0000087d147e10 bspà0000087d141070
[<a00000010030ea80>] driver_register+0xc0/0xe0
spà0000087d147e10 bspà0000087d141050
[<a00000010026d0a0>] pci_register_driver+0xe0/0x120
spà0000087d147e30 bspà0000087d141028
[<a0000002000a8120>] init+0xa0/0x120 [ehci_hcd]
spà0000087d147e30 bspà0000087d141000
[<a0000001000d5970>] sys_init_module+0x390/0x680
spà0000087d147e30 bspà0000087d140f80
[<a000000100012ec0>] ia64_ret_from_syscall+0x0/0x20
spà0000087d147e30 bspà0000087d140f80
And then the machine is dead.
Any ideas?
Andreas.
--
Andreas Schwab, SuSE Labs, schwab@suse.de
SuSE Linux AG, Deutschherrnstr. 15-19, D-90429 Nürnberg
Key fingerprint = 58CA 54C7 6D53 942B 1756 01D3 44D5 214B 8276 4ED5
"And now for something completely different."
next reply other threads:[~2003-11-12 15:37 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-11-12 15:37 Andreas Schwab [this message]
2003-11-14 13:03 ` drivers/usb/core/config.c: invalid configuration descriptor Andreas Schwab
2003-11-14 15:32 ` Randy.Dunlap
2003-11-14 15:46 ` David Mosberger
2003-11-14 15:53 ` Andreas Schwab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-linux-ia64-106865176701709@msgid-missing \
--to=schwab@suse.de \
--cc=linux-ia64@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.