Latest 2.6 IA64 Baseline (Mosberger) testing report (Boot hang)

["Yu, Luming" <luming.yu@intel.com>]

[-- Attachment #1: Type: text/plain, Size: 3031 bytes --]

ACPI Test Report  for 2.6 ia64 kernel 
=========================
Hardware Configuration:
-----------------------
System Name: ACPI-LION
System Type: 4 way 800M Itanium, Lion
M/B revision: N/A
Processor version: N/A
Firmware Versions: N/A
I/O configuration summary:
	QLogic QLA12160, Seagate ST39205LC boot drive
	IDE floppy and CDROM
	Serial console
	PS/2 keyboard and mouse
	USB mouse
	Ethernet Pro 100

Software Configuration:
-----------------------
	1.Bk pull form http://lia64.bkbits.net/linux-ia64-2.5 on 11/19 (Shanghai time)
	2.bk pull from http://linux-acpi.bkbits.net/linux-acpi-test-2.6.0 on 11/19 (Shanghai time)
	Successfully automerged by bk without out any manually work.

	3. patch from http://bugzilla.kernel.org/show_bug.cgi?id=1533 to solve  kernel unaligned access when pressing power button


ACPI Features Tested: (prioritized).
--------------------
1. Boot 				tested ok
2. serial console			tested ok
3. PS/2 keyboard			only work for a few minutes, then hang
4. ATI (run X window system)		tested ok
5. PS/2 mouse				tested ok
6. USB mouse				tested ok
7. NIC (eg. Ping or ftp)		tested ok
8. IDE (eg. r/w floppy or CDROM)	tested ok
9. SCI (eg. Press power button)		tested ok
10. Soft Power off				tested ok

           CPU0       CPU1       CPU2       CPU3
 29:          0          0          0          0          LSAPIC  cmc_poll
 30:          0          0          0          0  IO-SAPIC-level  cpe_hndlr
 31:          0          0          0          0          LSAPIC  cmc_hndlr
 32:        724          4         32          0   IO-SAPIC-edge  i8042
 33:        493          0          9          0   IO-SAPIC-edge  ide1
 34:         34          0          4          0   IO-SAPIC-edge  ide0
 36:        777         31         46          0   IO-SAPIC-edge  i8042
 39:          2          0          0          0  IO-SAPIC-level  acpi
 44:         16          0          3          0   IO-SAPIC-edge  serial
 45:         14          0          3          0   IO-SAPIC-edge  serial
 54:       1656          9         78          2  IO-SAPIC-level  uhci_hcd
 55:       1032          5         55          1  IO-SAPIC-level  eth0
 61:       5520         13        279          1  IO-SAPIC-level  qla1280
232:          0          0          0          0          LSAPIC  mca_rdzv
238:          0          0          0          0          LSAPIC  perfmon
239:     354543     349871     349425     348988          LSAPIC  timer
240:          0          0          0          0          LSAPIC  mca_wkup
254:        154        126        218        183          LSAPIC  IPI
NMI:          0          0          0          0
ERR:          0

Problems:

1. PS/2 keyboard	only work for a few minutes, then hang.

2.alloc 0x0-0xcf7 from PCI IO for PCI Bus 0000:00 failed. (known issue)

3.ACPI: No IRQ known for interrupt pin B of device 0000:00:03.3. (Known issue)

 <<dmesg.26.ZIP>>  <<2.6.config.ZIP>>  <<lspci.26.ZIP>> 
Thanks,
Luming



[-- Attachment #2: dmesg.26.ZIP --]
[-- Type: application/x-zip-compressed, Size: 5254 bytes --]

[-- Attachment #3: 2.6.config.ZIP --]
[-- Type: application/x-zip-compressed, Size: 5437 bytes --]

[-- Attachment #4: lspci.26.ZIP --]
[-- Type: application/x-zip-compressed, Size: 1200 bytes --]