All of lore.kernel.org
 help / color / mirror / Atom feed
From: HvR <hvrietsc@yahoo.com>
To: linux-sound@vger.kernel.org
Subject: Re: Sound problem after suspend.  Kernel version 2.3.99-pre3
Date: Tue, 28 Mar 2000 05:51:36 +0000	[thread overview]
Message-ID: <marc-linux-sound-95422288524824@msgid-missing> (raw)
In-Reply-To: <marc-linux-sound-95419175303519@msgid-missing>

i had the same problems with 2.2.15 i needed the
following presuspend script:

#!/bin/sh
# need to unload sound modules before suspend
# kill any sound makers
killall -9 xmms
killall -9 mpg123
killall -9 mixer_applet
#/usr/bin/esdplay /etc/sysconfig/sounds/presuspend.wav
# kill mouse to quiet sound, seriously
killall -9 gpm
# save soundlevels
/usr/bin/aumix -f /etc/.aumixrc -S
/sbin/ifdown eth0       # free card
/sbin/cardctl eject
/sbin/rmmod opl3
/sbin/rmmod opl3sa2 
/sbin/rmmod mpu401
/sbin/rmmod ad1848
/sbin/rmmod sound
/sbin/rmmod soundcore
/sbin/rmmod soundlow
/sbin/rmmod -as

the gpm killing is really necessary without this the
sound module will not unload!!!

then my postsuspend script is:
#!/bin/sh
# what we do after we get back from suspend
/sbin/cardctl insert
/sbin/rmmod opl3 2>/dev/null
/sbin/rmmod opl3sa2  2>/dev/null
/sbin/rmmod mpu401 2>/dev/null
/sbin/rmmod ad1848 2>/dev/null
/sbin/rmmod sound 2>/dev/null
/sbin/rmmod soundcore 2>/dev/null
/sbin/rmmod soundlow 2>/dev/null
# ok now put sound back
modprobe sound
/usr/bin/aumix -f /etc/.aumixrc -L > /dev/null
#/usr/bin/esdplay
/etc/sysconfig/sounds/postsuspend.wav
# restart at daemon it might have lost time
/etc/rc.d/init.d/atd restart
# put 2 button mouse back
/usr/sbin/gpm -t ps/2

good luck...
--- Dave Caswell <davec@apocalypse.org> wrote:
> With kernel version 2.3.99-pre3 sound words until I
> suspend my Toshiba
> Satellite Pro 445CDX, but after resuming it will
> produce no sound.
> This problem came in with the sound clean-ups after
> version 2.3.49.  
> 
> I've appended what sound related information I've
> got to the end of
> this message.
> 
> Thanks,
> 	davec
> 
> Append line in lilo.conf:
> append = "ppa=0x378 parport=0x378,7,3
> opl3sa2=0x370,5,1,0,0x530,0x330 "
> 
> Log entries:
> 
> Mar 26 14:17:52 krypton kernel: ad1848/cs4248 codec
> driver Copyright (C) by Hannu Savolainen 1993-1996 
> Mar 26 14:17:52 krypton kernel: Found OPL3-SA3
> (YMF715) 
> Mar 26 14:17:52 krypton kernel: <MS Sound System
> (CS4231)> at 0x534 irq 5 dma 1,0 
> Mar 26 14:17:52 krypton kernel: <MPU-401 0.0  Midi
> interface #1> at 0x330 irq 5 dma 1,0 
> 
> 
> Config File set-up
> #
> # Sound
> #
> CONFIG_SOUND=y
> # CONFIG_SOUND_CMPCI is not set
> # CONFIG_SOUND_ES1370 is not set
> # CONFIG_SOUND_ES1371 is not set
> # CONFIG_SOUND_ESSSOLO1 is not set
> # CONFIG_SOUND_MAESTRO is not set
> # CONFIG_SOUND_SONICVIBES is not set
> # CONFIG_SOUND_TRIDENT is not set
> # CONFIG_SOUND_MSNDCLAS is not set
> # CONFIG_SOUND_MSNDPIN is not set
> CONFIG_SOUND_OSS=y
> CONFIG_SOUND_TRACEINIT=y
> CONFIG_SOUND_DMAP=y
> # CONFIG_SOUND_AD1816 is not set
> # CONFIG_SOUND_SGALAXY is not set
> # CONFIG_SOUND_ADLIB is not set
> # CONFIG_SOUND_ACI_MIXER is not set
> # CONFIG_SOUND_CS4232 is not set
> # CONFIG_SOUND_SSCAPE is not set
> # CONFIG_SOUND_GUS is not set
> # CONFIG_SOUND_VMIDI is not set
> # CONFIG_SOUND_TRIX is not set
> # CONFIG_SOUND_MSS is not set
> # CONFIG_SOUND_MPU401 is not set
> # CONFIG_SOUND_NM256 is not set
> # CONFIG_SOUND_MAD16 is not set
> # CONFIG_SOUND_PAS is not set
> # CONFIG_PAS_JOYSTICK is not set
> # CONFIG_SOUND_PSS is not set
> # CONFIG_SOUND_SOFTOSS is not set
> # CONFIG_SOUND_SB is not set
> # CONFIG_SOUND_AWE32_SYNTH is not set
> # CONFIG_SOUND_WAVEFRONT is not set
> # CONFIG_SOUND_MAUI is not set
> # CONFIG_SOUND_VIA82CXXX is not set
> # CONFIG_SOUND_YM3812 is not set
> # CONFIG_SOUND_OPL3SA1 is not set
> CONFIG_SOUND_OPL3SA2=y
> # CONFIG_SOUND_UART6850 is not set
> # CONFIG_SOUND_AEDSP16 is not set
> 
> 

__________________________________________________
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://im.yahoo.com

      reply	other threads:[~2000-03-28  5:51 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2000-03-27 19:48 Sound problem after suspend. Kernel version 2.3.99-pre3 Dave Caswell
2000-03-28  5:51 ` HvR [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=marc-linux-sound-95422288524824@msgid-missing \
    --to=hvrietsc@yahoo.com \
    --cc=linux-sound@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.