From: Roger Larsson <roger.larsson@norran.net>
To: linux-sound@vger.kernel.org
Subject: [PATCH] latency improvements, one reschedule moved
Date: Sat, 01 Jul 2000 02:06:04 +0000 [thread overview]
Message-ID: <marc-linux-sound-96241827428163@msgid-missing> (raw)
[-- Attachment #1: Type: text/plain, Size: 590 bytes --]
Hi Linus, Paul, Benno, ...,
[patch against linux-2.4.0-test3-pre2]
I cleaned up kswapd and moved its reschedule point.
Disk performance is close to the same.
Latencies have improved a lot (tested with Bennos latencytest)
* sync is still problematic
* mmap002 (Quintinela) still gives a 212 ms latency
(compared to 423 ms for the unpatched...)
* other disk related latencies are down under 30 ms.
(streaming read, copy, write)
* the number of overruns has dropped considerably!
(running 4 buffers with a deadline of 23 ms)
/RogerL
--
Home page:
http://www.norran.net/nra02596/
[-- Attachment #2: patch-2.4.0-test3-pre2-vmscan.latency.2 --]
[-- Type: text/plain, Size: 2841 bytes --]
--- linux/mm/vmscan.c.orig Wed May 31 20:13:37 2000
+++ linux/mm/vmscan.c Sat Jul 1 03:29:00 2000
@@ -419,6 +419,48 @@
}
/*
+ * Check if there is any memory pressure (free_pages < pages_low)
+ */
+static inline int memory_pressure(void)
+{
+ pg_data_t *pgdat = pgdat_list;
+
+ do {
+ int i;
+ for(i = 0; i < MAX_NR_ZONES; i++) {
+ zone_t *zone = pgdat->node_zones+ i;
+ if (!zone->size &&
+ zone->free_pages < zone->pages_low)
+ return 1;
+ }
+ pgdat = pgdat->node_next;
+ } while (pgdat);
+
+ return 0;
+}
+
+/*
+ * Check if there is any memory pressure (free_pages < pages_low)
+ */
+static inline int keep_kswapd_awake(void)
+{
+ pg_data_t *pgdat = pgdat_list;
+
+ do {
+ int i;
+ for(i = 0; i < MAX_NR_ZONES; i++) {
+ zone_t *zone = pgdat->node_zones+ i;
+ if (!zone->size &&
+ zone->zone_wake_kswapd)
+ return 1;
+ }
+ pgdat = pgdat->node_next;
+ } while (pgdat);
+
+ return 0;
+}
+
+/*
* We need to make the locks finer granularity, but right
* now we need this so that we can do page allocations
* without holding the kernel lock etc.
@@ -442,7 +484,20 @@
priority = 64;
do {
+ /* should __GFP_WAIT be checked?
+ * assume not - not WAITING for a free page
+ * let more important task execute before
+ * continuing (Note: kswapd does not use it).
+ */
+ if (current->need_resched) {
+ schedule();
+ /* time has passed - pressure too? */
+ if (!memory_pressure())
+ goto done;
+ }
+
while (shrink_mmap(priority, gfp_mask)) {
+ /* check __GFP_WAIT ? see below */
if (!--count)
goto done;
}
@@ -477,16 +532,21 @@
if (--swap_count < 0)
break;
- } while (--priority >= 0);
+ priority--;
+ } while (priority >= 0);
/* Always end on a shrink_mmap.. */
while (shrink_mmap(0, gfp_mask)) {
+ if (current->need_resched)
+ schedule();
+ if (!memory_pressure())
+ return 1;
if (!--count)
goto done;
}
/* We return 1 if we are freed some page */
return (count != FREE_COUNT);
-
+
done:
return 1;
}
@@ -530,29 +590,12 @@
tsk->flags |= PF_MEMALLOC;
for (;;) {
- pg_data_t *pgdat;
- int something_to_do = 0;
-
- pgdat = pgdat_list;
- do {
- int i;
- for(i = 0; i < MAX_NR_ZONES; i++) {
- zone_t *zone = pgdat->node_zones+ i;
- if (tsk->need_resched)
- schedule();
- if (!zone->size || !zone->zone_wake_kswapd)
- continue;
- if (zone->free_pages < zone->pages_low)
- something_to_do = 1;
- do_try_to_free_pages(GFP_KSWAPD);
- }
- pgdat = pgdat->node_next;
- } while (pgdat);
-
- if (!something_to_do) {
- tsk->state = TASK_INTERRUPTIBLE;
- interruptible_sleep_on(&kswapd_wait);
+ if (!keep_kswapd_awake()) {
+ tsk->state = TASK_INTERRUPTIBLE;
+ interruptible_sleep_on(&kswapd_wait);
}
+
+ do_try_to_free_pages(GFP_KSWAPD);
}
}
next reply other threads:[~2000-07-01 2:06 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-07-01 2:06 Roger Larsson [this message]
-- strict thread matches above, loose matches on Subject: below --
2000-07-01 2:06 [PATCH] latency improvements, one reschedule moved Roger Larsson
2000-07-05 0:50 ` Roger Larsson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-linux-sound-96241827428163@msgid-missing \
--to=roger.larsson@norran.net \
--cc=linux-sound@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.