From mboxrd@z Thu Jan 1 00:00:00 1970 From: Eiki Ito Date: Sun, 10 May 1998 03:57:06 +0000 Subject: compiling libc5 on UP1.0 Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ultralinux@vger.kernel.org Thanks David for exactly what I wanted! I wrote: >o include/asm should point to asm-sparc64, not asm-sparc, correct? > >o If I do 'configure' on UP1.0, it says > "Build sparc-linux library for sparc64 running linux" > I don't need to change sparc64 to sparc, do I? With these two fixed, it compiled okay. Next I'll compile /sbin/init using this libc and try booting again. >How easy was it to get the page table guarding and other elements of >the Hal sparc64 chips to work with our memory management and TLB miss >schemes in the kernel? Can't wait to see this work, feel free to send >patches to me for Hal/V9 support whenever you feel the urge. ;-) SPARC64-III's memory management is quite different from SPARC64-I and II, much closer to Ultrasparc. TLB format is (I think) the only major difference. No advertise, but if you are interested please refer to Microprocessor Report 12/08/97. Sure, I'll send patches when they work or when the system gets shipped, whichever comes later:) (Don't ask me when, I'll be fired) Thanks, ------------------------------------- Eiki Ito HAL Computer Systems, Inc. 1315 Dell Avenue, Campbell, CA95008, USA e-mail: eiki@hal.com