From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephan van Hienen Date: Tue, 12 May 1998 19:56:55 +0000 Subject: Booting An Ultra Sparc 10 Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ultralinux@vger.kernel.org hi just wanted to install on an ultra sparc 10 (300mhz ultra II with 320mb ram) i'm doing the load with boot net form an intel redhat 5.0 (p2) i shows linux 2.1.99 (or the .old image or .verryold) 320mb ram and that i use the ati controller (there is also an creator 3d inside, but the monitor is on the oboard card) and it crashes : openboot 3.11 Boot device /pci@1f,0/pci@1,1/network@1,1 i tells me : Found cpu 0 found 1 cpu prom device tree node(s). Central: no central found. Memory: 319560k available (1576k kernel code, 4432k data, 152 init) [fffff80000000000,fffff80013f26000] SBUS: No SBUS's found. Console: colour SUNPCI 128x54, 16 point font, 864 scans PCI: Probing for controllers PCI: Found SABRE, main regs at ffff(5f)9fe00000000 SABRE: PCI cofnfig space at fffff9fe01000000 SABREL DVMA at c0000000 [2 [20000000] PCI: Probing PCI hardware ebus0: fff......... ebus1: fff........... mach64_init: IOBASE[fffff9fe02c00100] MEMBASE[fffff9ffe1000000] mah mach64_init chip_type[4754], total_vram[00200000] Unable to handle kernel NULL pointer dereference<1>tsk->mm->context 0000000000000000 tsk->mm->pgd = fffff800000020000 (here a picture ) swapper(0):Oops TSTATE: and then some registers ...... ....... ....... ....... ...... ....... ....... DUMP: Kernel panic: Attempted to kill the idle task In swapper task - not syncing Press L1-A to return to the boot prom _ and that is it P.s. also mail me at ddx@cable.a2000.nl because i'm not approved by the list owner to be on the list so i can't read the list P.s. i typed this stuff in so i can have made a mistake