From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alberto Brealey Date: Fri, 24 Jul 1998 17:22:18 +0000 Subject: problems booting an Ultra5... Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="windows-1252" Content-Transfer-Encoding: quoted-printable To: ultralinux@vger.kernel.org trying to install UP-1.0.9 in an ultra5 PCI, IDE hd... it boots via tftp fine, but when it gets to the IDE probing part it just dies... last mesgs: <-- snip --> CMD646: IDE controller on PCI bus 01 dev 18 CMD646: 100% native mode on irq c00007e0 ide0: BM-DMA at 0xfffff9fe02c00020-0xfffff9fe02c00027, BIOS settings: hda:pio, hdb:pio ide0: BM-DMA at 0xfffff9fe02c00028-0xfffff9fe02c0002f, BIOS settings: hdc: pio, hdd:pio hda: ST34342A, ATA DISK drive hdc: CRD-8240B, ATAPI CDROM drive ide0 at 0x2c00000-0x2c00007,0x2c0000a on irq -1073739808 ide1 at 0x2c00010-0x2c00017,0x2c0001a on irq -1073739808 (shared with ide0) CMD646: MDMA enable [SELECT SETXFER CMND wait STAT(50) SETFEATURE wait STAT(d0) STAT(d0) STAT(d0) STAT(d0) DMA_CAP DONE] hda: ST34342A, 4103MB w/128kB Cache, CHS=8894/15/63, DMA CMD646: MDMA enable [SELECT SETXFER CMND wait STAT(50) SETFEATURE wait =20 STAT(d0) STAT(d0) STAT(d0) STAT(d0) DMA_CAP DONE] hdc: packet command error: status=3D0xd0 { Busy } <--- then it just dies... ---> i remember seeing a message from someone with similar probs.. but can't find it :( thanks for your help, alberto