From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stephan van Hienen <ddx@cable.a2000.nl>
Date: Wed, 04 Nov 1998 10:55:00 +0000
Subject: Re: Still no go with 10mb on 100mb card
Message-Id: <marc-linux-ultrasparc-91017745314389@msgid-missing>
List-Id: <ultralinux.vger.kernel.org>
References: <marc-linux-ultrasparc-91009247508389@msgid-missing>
In-Reply-To: <marc-linux-ultrasparc-91009247508389@msgid-missing>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: ultralinux@vger.kernel.org

On Wed, 4 Nov 1998, David S. Miller wrote:

>    Date: 	Wed, 4 Nov 1998 10:37:54 +0000 (GMT)
>    From: Malcolm Beattie <mbeattie@sable.ox.ac.uk>
> 
>    It was detected as eth0 successfully (the onboard hme was detected
>    as eth1) but it didn't seem to be able to receive packets
>    properly. tcpdump from the remote side showed it sending out arp
>    queries and showed the corect reply being sent back but the ultra
>    just kept sending out arp queries as if it hadn't received
>    anything. The card itself works fine with Solaris. I ended up
>    removing the card completely after which an installation went fine
>    with the on-board hme (apart from later non-network problems that I
>    mention in the other message).
this looks like my problem


> 
> There were some problems with scsi/eth PCI cards on Ultra5's earlier,
> when was the most recent kernel you have tried with the card in the
> machine?  We believe this particular to be fixed by now.
kernel 2.1.125 (from rpm's)


> 
> Later,
> David S. Miller
> davem@dm.cobaltmicro.com
>