From mboxrd@z Thu Jan 1 00:00:00 1970 From: "David S. Miller" Date: Thu, 19 Nov 1998 17:15:36 +0000 Subject: Re: [Q] ultrapenguin-1.1 on UE4000 Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ultralinux@vger.kernel.org From: Jakub Jelinek Date: Wed, 18 Nov 1998 14:31:39 +0100 (MET) What's strange is that no SCSI devices has been found, also, the number of found SBUSes seems to be weird (I always thought every SBUS board has two SBUSes). Look closely at his prtconf (he sent it to me privately, and I believe to you too Jakub). There are 5 types of Ex000 board types I know of: 1) 'cpu' Ultra CPUs and memory simms 2) 'dual-sbus' Two SBUS's, embedded SOC and FAS/HME 3) 'upa-sbus' One UPA (for Creator3D etc.) slot and one SBUS 4) 'dual-sbus-soc+' Same as dual-sbus except uses SOC+ 5) 'pci' PSYCHO based PCI board One of his boards is a upa-sbus one, thus the odd number of SBUS's. This still doesn't explain why his SCSI disk was not detected. All of his FAS scsi adapters were detected, and the driver did not print any errors while probing the SCSI bus each time.. hmmm.. Eric, could you send us the output of "probe-scsi-all" from the PROM prompt on this box? Later, David S. Miller davem@dm.cobaltmicro.com