From mboxrd@z Thu Jan 1 00:00:00 1970 From: "David S. Miller" Date: Tue, 15 Dec 1998 22:08:45 +0000 Subject: Re: UltraSparc 10 Clone with Qlogic SCSI Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ultralinux@vger.kernel.org Date: Tue, 15 Dec 1998 12:46:55 +0800 (SGT) From: Ong Lon Voon Has anyone any success with this? It seems to be unsupported on the Supported Hardware list... On booting, no SCSI devices are found. Tried on an ultrasparc 2 clone too, but it could not mount the root filesystem at 0b:00. Any ideas? The cdrom is id 6 on the primary SCSI channel, and is recognised. Tried "linux root=/dev/sr0", but it didn't work too. We have the means to support the QLogic SCSI PCI cards in such systems (and therefore in Sun's Ether/SCSI PCI cards too) but since none of the developers have any such cards to test I cannot enable the driver. I'm working on obtaining such a card right now, but until I do these machines will be unsupported. Later, David S. Miller davem@dm.cobaltmicro.com