From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jakub Jelinek Date: Wed, 16 Dec 1998 22:09:59 +0000 Subject: Re: UltraPenguin 1.1.9 install problem Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ultralinux@vger.kernel.org > > The XSun server seems to ignore the -ar1 and -ar2 key repeat settings. > The keyboard is too speedy for my taste. That's why I'm adding now limited support for XF86Config to Xsun* (keyboard and files sections), so that one can easily configure xkb keyboards, set repeat setting and configure fonts (well, most is doable by xkbcomp or xset from xinitrc &co. scripts, but it is not that easy for an unexperienced user). > > All my other testing seems to be ok. I noticed the hme0 interface > failed to autoconfig against our Cisco 5000 Etherswitch, but Solaris > and Irix fail to do so also. Are there module arguments to force > the speed/duplex settings? David Miller is going to write an eth-tool utility, which will allow setting stuff like that. Cheers, Jakub ___________________________________________________________________ Jakub Jelinek | jj@sunsite.mff.cuni.cz | http://sunsite.mff.cuni.cz Administrator of SunSITE Czech Republic, MFF, Charles University ___________________________________________________________________ UltraLinux | http://ultra.linux.cz/ | http://ultra.penguin.cz/ Linux version 2.1.130 on a sparc64 machine (3958.37 BogoMips) ___________________________________________________________________