From mboxrd@z Thu Jan 1 00:00:00 1970 From: marty@caltrans.ca.gov (Marty Lucich) Date: Fri, 09 Apr 1999 00:48:18 +0000 Subject: 1.1.9 net boot failer on E3500 Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="windows-1252" Content-Transfer-Encoding: quoted-printable To: ultralinux@vger.kernel.org Greetings, I just downloaded ftp://ultra.linux.cz/pub/ultrapenguin-1.1.9/sparc64/images/tftprescue.img dated Tue Apr 6 19:37:00 1999. When I tried to boot it on an E3500 it didn't get far. Rebooting with command: boot net Boot device: /sbus@3,0/SUNW,hme@3,8c00000 File and args:=20 Using Onboard Transceiver - Link Up.=20 34ae00=20 Server IP address: 149.136.180.12=20 Client IP address: 149.136.180.4=20 TILO Fast Data Access MMU Miss {6} ok=20 Is this a known problem? Is it really even a problem? The full console messages follow. Thanks -m ---------------------------------------------------------------------- {6} ok boot net Resetting...=20 Software Power ON @(#) Ultra Enterprise 3.2 Version 18 created 1998/09/10 14:13 CPU =3D 0000.0000.0000.0006 Probing keyboard Done 3,0> 3,0>@(#) POST 3.9.4 1998/06/09 16:25 3,0> SelfTest Initializing (Diag Level 10, ENV 00004001) IMPL 0011 MASK 20 3,0>Board 3 CPU FPROM Test 3,0>Board 3 Basic CPU Test 3,0> Set CPU UPA Config and Init SDB Data 3,0> SRAM Mode =3D 22, Clock Mode =3D 4:1, PCON =3D 6fa, MCAP =3D 0 3,0>Board 3 MMU Enable Test 3,0> DMMU Init 3,0> IMMU Init 3,0> Mapping Selftest Enabling MMUs 3,0>Board 3 Ecache Test 3,0> Ecache Probe 3,0> Ecache Tags 3,0> Ecache Quick Verify 3,0> Ecache Init 3,0> Ecache RAM 3,0> Ecache Address Line 3,0> Configure Ecache Limit 3,0>Ecache Size =3D 00400000, Limited to 00400000=20 3,0>Board 3 FPU Functional Test 3,0> FPU Enable 3,0>Board 3 Board Master Select Test 3,0> Selecting a Board Master 3,0>Board 3 FireHose Devices Test 3,0>Board 3 Address Controller Test 3,0> AC Initialization 3,0> AC DTAG Init 3,0>Board 3 Dual Tags Test 3,0> AC DTAG Init 3,0>Board 3 FireHose Controller Test 3,0> FHC Initialization 3,0>Board 3 JTAG Test 3,0> Verify System Board Scan Ring 3,0>Board 3 Centerplane Test 3,0> Centerplane Join 3,0>Setting JTAG Master 3,0>Clear JTAG Master 3,0>Board 3 Setup Cache Size Test 3,0> Setting Up Cache Size 3,0>Board 3 System Master Select Test 3,0> Setting System Master 3,0>POST Master Selected (JTAG,CENTRAL) 3,0>Board 16 Clock Board Test 3,0> Clock Board Initialization 3,0> Clock Board Temperature Check 3,0>Board 16 Clock Board Serial Ports Test 3,0>Board 16 NVRAM Devices Test 3,0> M48T59 (TOD) Init 3,0>Board 3 System Board Probe Test 3,0> Probing all CPU/Memory BDA 3,0> Probing System Boards 3,0> Probing CPU Module JTAG Rings 3,0>Setting System Clock Frequency 3,0> CPU Module mid 6 Checked in OK (speed code =3D 7) 3,0> CPU mid 14 Version=00170011.20000507 3,0> CPU Module mid 14 Checked in OK (speed code =3D 7) 3,0>System Frequency (MHz),fcpu36, fmod=168, fsys=84, fgen36 3,0>TESTING BOARD 1 3,0>Board 1 JTAG Test 3,0> Verify System Board Scan Ring 3,0>Board 1 Centerplane Test 3,0> Centerplane Check 3,0>Board 1 Address Controller Test 3,0> AC Initialization 3,0>Setting Freq to 25MHZ 3,0> AC DTAG Init 3,0>Board 1 FireHose Controller Test 3,0> FHC Initialization 3,0>Board 1 NVRAM Devices Test 3,0> M48T59 (TOD) Init 3,0>TESTING BOARD 5 3,0>Board 5 JTAG Test 3,0> Verify System Board Scan Ring 3,0>Board 5 Centerplane Test 3,0> Centerplane Check 3,0>Board 5 Address Controller Test 3,0> AC Initialization 3,0>Setting Freq to 25MHZ 3,0> AC DTAG Init 3,0>Board 5 FireHose Controller Test 3,0> FHC Initialization 3,0>Board 5 NVRAM Devices Test 3,0> M48T59 (TOD) Init 3,0>Re-mapping to Local Device Space 3,0>Begin Central Space Serial Port access 3,0>Enable AC Control Parity 3,0>Hotplug Trigger Test 3,0>Init Counters for Hotplug 3,0>Board 3 Cross Calls Test 3,0>Board 3 Environmental Probe Test 3,0> Environmental Probe 3,0>Checking Power Supply Configuration 3,0>Power is adequate, load 4 ps 2 3,0>Use existing memory configuraton=20 3,0>TESTING IO BOARD 1 3,0>Board 1 I/O FPROM Test 3,0>@(#) iPOST 3.4.6 1998/04/16 14:22 3,0> TESTING IO BOARD 1 ASICs 3,0> TESTING SysIO Port 0 3,0>Board 1 SysIO Registers Test 3,0> SysIO Register Initialization 3,0> SysIO RAM Initialization 3,0>Board 1 SysIO Functional Test 3,0> Clear Interrupt Map and State Registers 3,0>Board 1 OnBoard IO Chipset (SOC) Test 3,0> TESTING SysIO Port 1 3,0>Board 1 SysIO Registers Test 3,0> SysIO Register Initialization 3,0> SysIO RAM Initialization 3,0>Board 1 SysIO Functional Test 3,0> Clear Interrupt Map and State Registers 3,0>Board 1 OnBoard IO Chipset (FEPS) Test 3,0>IO BOARD 1 TESTED 3,0>TESTING IO BOARD 5 3,0>Board 5 I/O FPROM Test 3,0>@(#) iPOST 3.4.4 1997/08/26 17:37 3,0> TESTING IO BOARD 5 ASICs 3,0> TESTING SysIO Port 0 3,0>Board 5 SysIO Registers Test 3,0> SysIO Register Initialization 3,0> SysIO RAM Initialization 3,0>Board 5 SysIO Functional Test 3,0> Clear Interrupt Map and State Registers 3,0>Board 5 OnBoard IO Chipset (SOC) Test 3,0> TESTING SysIO Port 1 3,0>Board 5 SysIO Registers Test 3,0> SysIO Register Initialization 3,0> SysIO RAM Initialization 3,0>Board 5 SysIO Functional Test 3,0> Clear Interrupt Map and State Registers 3,0>Board 5 OnBoard IO Chipset (FEPS) Test 3,0>IO BOARD 5 TESTED 3,0>Probing for Disk System boards 3,0>Board 3 System Interrupts Test 3,0> 3,0> System Board Status 3,0>----------------------------------------------------------------- 3,0> Slot Board Status Board Type Failures 3,0>----------------------------------------------------------------- 3,0> 0 | Not installed | | 3,0> 1 | Normal |+IO Type 4 | 3,0> 2 | Not installed | | 3,0> 3 | Normal |+CPU/Memory | 3,0> 4 | Not installed | | 3,0> 5 | Normal |+IO Type 4 | 3,0> 6 | Not installed | | 3,0> 7 | Normal |+CPU/Memory | 3,0> 8 | Not installed | | 3,0> 9 | Not installed | | 3,0> 16 | Normal | Clock Board | 3,0>----------------------------------------------------------------- 3,0> 3,0> CPU Module Status 3,0>----------------------------------------------------------------- 3,0> MID OK Cache Speed Version 3,0>----------------------------------------------------------------- 3,0> 6 | y | 4096 | 336 | 00170011.20000507 3,0> 14 | y | 4096 | 336 | 00170011.20000507 3,0>----------------------------------------------------------------- 3,0>System Frequency (MHz),fcpu36, fmod=168, fsys=84, fgen36 3,0> Populated Memory Bank Status 3,0> bd # Size Address Way Status 3,0> 3 1024 0 2 Normal 3,0> 7 1024 1 2 Normal 3,0> 3,0> POST COMPLETE 3,0>Entering OBP Switching to high addresses=20 Setting up TLBs Done MMU ON PC =3D 0000.01ff.f000.1ea8 PC =3D 0000.0000.0000.1f14 Decompressing in Memory Done Size =3D 0000.0000.0007.01b0 ttya initialized Using POST's System Configuration Setting up memory Starting CPU ID 14=20 fhc ac simm-status environment sram flashprom SUNW,UltraSPARC-II=20 fhc ac simm-status environment sram flashprom SUNW,UltraSPARC-II=20 Probing UPA Slot at 2,0 sbus fhc ac environment flashprom eeprom sbus-spe= ed counter-timer=20 Probing UPA Slot at 3,0 sbus counter-timer=20 Probing UPA Slot at a,0 sbus fhc ac environment flashprom eeprom sbus-spe= ed counter-timer=20 Probing UPA Slot at b,0 sbus counter-timer=20 Probing /sbus@2,0 at d,0 SUNW,socal sf ssd sf ssd=20 Probing /sbus@2,0 at 1,0 Nothing there Probing /sbus@2,0 at 2,0 Nothing there Probing /sbus@3,0 at 3,0 SUNW,hme SUNW,fas sd st=20 Probing /sbus@3,0 at 0,0 Nothing there Probing /sbus@a,0 at d,0 SUNW,socal sf ssd sf ssd=20 Probing /sbus@a,0 at 1,0 Nothing there Probing /sbus@a,0 at 2,0 SUNW,ba=20 Probing /sbus@b,0 at 3,0 SUNW,hme SUNW,fas sd st=20 Probing /sbus@b,0 at 0,0 Nothing there screen not found. Can't open input device. Keyboard not present. Using ttya for input and output. Using POST's System Configuration Setting up memory Starting CPU ID 14=20 fhc ac simm-status environment sram flashprom SUNW,UltraSPARC-II=20 fhc ac simm-status environment sram flashprom SUNW,UltraSPARC-II=20 Probing UPA Slot at 2,0 sbus fhc ac environment flashprom eeprom sbus-spe= ed counter-timer=20 Probing UPA Slot at 3,0 sbus counter-timer=20 Probing UPA Slot at a,0 sbus fhc ac environment flashprom eeprom sbus-spe= ed counter-timer=20 Probing UPA Slot at b,0 sbus counter-timer=20 Probing /sbus@2,0 at d,0 SUNW,socal sf ssd sf ssd=20 Probing /sbus@2,0 at 1,0 Nothing there Probing /sbus@2,0 at 2,0 Nothing there Probing /sbus@3,0 at 3,0 SUNW,hme SUNW,fas sd st=20 Probing /sbus@3,0 at 0,0 Nothing there Probing /sbus@a,0 at d,0 SUNW,socal sf ssd sf ssd=20 Probing /sbus@a,0 at 1,0 Nothing there Probing /sbus@a,0 at 2,0 SUNW,ba=20 Probing /sbus@b,0 at 3,0 SUNW,hme SUNW,fas sd st=20 Probing /sbus@b,0 at 0,0 Nothing there 5-slot Sun Enterprise E3500, No Keyboard OpenBoot 3.2.18, 2048 MB memory installed, Serial #10378427. Ethernet address 8:0:20:9e:5c:bb, Host ID: 809e5cbb. Rebooting with command: boot net Boot device: /sbus@3,0/SUNW,hme@3,8c00000 File and args:=20 Using Onboard Transceiver - Link Up.=20 34ae00=20 Server IP address: 149.136.180.12=20 Client IP address: 149.136.180.4=20 TILO Fast Data Access MMU Miss {6} ok=20