From mboxrd@z Thu Jan 1 00:00:00 1970 From: "David A. Cooley" Date: Fri, 17 Sep 1999 21:21:09 +0000 Subject: Re: Install options on AXi Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ultralinux@vger.kernel.org At 03:43 PM 9/17/99 -0400, Brent Jay Thorpe wrote: >All, > >I have to make a customer presentation about install options with Linux >on AXi (CDROM, Floppy, Network.) I have been doing some homework in >making the "slideware" and found that you could get the initial boot >loader from a floppy device (as well as tftp.) In following the >instructions on creating the floppy, I found that my system does not >recognize the floppy device as a valid block device. In other words, it >cannot see the floppy device at all. I also found out that it does not >recognize the printer port (lp0) either. Anyone know what is the >correct device for both the floppy and printer on an AXi? Brent, I believe the AXi is an UltraSparc based board... None of the Linux ports to sparc support the Floppy for boot, and the lp port is only supported experimentally. ============================= David Cooley N5XMT Internet: N5XMT@bellsouth.net Packet: N5XMT@KQ4LO.#INT.NC.USA.NA T.A.P.R. Member #7068 Sponges grow in the ocean... Wonder how deep it would be if they didn't?! =============================