From mboxrd@z Thu Jan 1 00:00:00 1970 From: "David S. Miller" Date: Sat, 18 Sep 1999 01:38:40 +0000 Subject: Re: Install options on AXi Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ultralinux@vger.kernel.org Date: Fri, 17 Sep 1999 17:21:09 -0400 From: "David A. Cooley" I believe the AXi is an UltraSparc based board... None of the Linux ports to sparc support the Floppy for boot, and the lp port is only supported experimentally. This is not true at all. The situation in a nutshell is: 1) All 32-bit Sparc systems should work with a floppy boot. 2) Most UltraSparc systems do not, these include all SBUS UltraSparc systems and Ultra10, Ultra5, Ultra30, Ultra60 PCI systems. This is due to a bug in the OBP firmware shipped in those machines, and is not our doing :-) All system level board UltraSparc/PCI systems shipped by SME such as the AXi and AXmp should work with floppy boot because they lack the OBP firmware bug, as far as we've been told. 3) parallel port is fully supported on PCI systems, it is only experimental and not fully supported on SBUS systems, we are working to correct this SBUS issue for 2.4.x kernels Most people having problems with the parallel port on PCI UltraSparcs turn out to not have loaded the appropriate kernel modules. Later, David S. Miller davem@redhat.com