From mboxrd@z Thu Jan 1 00:00:00 1970 From: "David S. Miller" Date: Sat, 18 Sep 1999 01:41:51 +0000 Subject: Re: RAID is now working... Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ultralinux@vger.kernel.org Date: Fri, 17 Sep 1999 20:44:54 -0400 From: "David A. Cooley" Anyone know where I can get a firmware upgrade for the Qlogic SBUS cards that will flash them under Linux??? (or how to do it from the boot prompt on an Ultra II?????) It needs to be loaded by the driver, so you'd need to update the firmware in the drivers/scsi/qlogicpti_asm.h source file in the kernel, then rebuild the kernel with the new driver and reboot. Matt Jacob has newer firmware in his ISP driver collection, but I have not tried nor tested it on any of my SBUS isp cards so I cannot say if it works or not. In the past, my attempts to load newer firmware or allow firmware loading on newer cards has resulted in one problem or another and this is why it is not updated in the latest drivers, so be forwarned. Later, David S. Miller davem@redhat.com