From mboxrd@z Thu Jan 1 00:00:00 1970 From: "David S. Miller" Date: Sat, 18 Sep 1999 01:44:34 +0000 Subject: Re: Boot on AXMp is failing Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ultralinux@vger.kernel.org Date: Fri, 17 Sep 1999 14:08:05 -0400 From: Brent Jay Thorpe IHAC who asks: cdrom(Red Hat 6.0 Linux)Boot on AXMp is failing with the following error message: UGH: property for adc was 8,need < 1 Not sure what the problem is. Any help would be appreciated Yep, unfortunately the use nonstandard properties for some of the environmental control devices behind EBUS in AX* systems, and since we wouldn't know how to handle these parameters we fail instead of crashing the system. Without access to such a system I cannot provide a "safe" workaround. This is peculiar report in that an AXmp system I temporarily had worked fine, this must be a newer revision of the board because this reported failure case did not exist with the AXmp board I tested on several months ago and the relevant pieces of the kernel have not been changed in the meantime. Later, David S. Miller davem@redhat.com