From mboxrd@z Thu Jan 1 00:00:00 1970 From: Florian Lohoff Date: Wed, 22 Sep 1999 01:02:19 +0000 Subject: Re: RAID is now working... Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ultralinux@vger.kernel.org On Sun, Sep 19, 1999 at 07:40:59PM -0400, David Cooley wrote: > > Mine started doing that on the second PTI card I installed... Got looking > at the boot messages where it first detects the cards... My old one > (working fine) is detected as ultra scsi... the "new one" is detected as > fast scsi... Both cards have the same SUN part number on them, but the > "new" one has ver 1.71 on the sticker on the prom on the board, and the > "old" one (the one that works all the time) has 1.73 on it. The code read > by the kernel driver in the boards is 1.21 for the one that fails and 1.25 > on the good one. I just had a quick look. The Driver Firmware in the Kernel source seems to be 1.31 (For non-PTI and 1.24 for PTI)... In one of the latest Sun patches i found a 1.32 (Reverse *ng*n**r*ng). Ill try to make a qlogicpti_asm.c compatible file (Without knowing what i am doing). As my cards dont state "Performance Technologies" i think the 1.31 gets loaded currently (dmesg states Firmware 1.21 but per design the firmware gets loaded on initialization) So long ... Flo -- Florian Lohoff flo@rfc822.org +49-5241-470566 ... The failure can be random; however, when it does occur, it is catastrophic and is repeatable ... Cisco Field Notice