From mboxrd@z Thu Jan 1 00:00:00 1970 From: David Cooley Date: Tue, 05 Oct 1999 15:04:34 +0000 Subject: Re: tulip under linux sparc? Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ultralinux@vger.kernel.org At 06:22 AM 10/5/1999 -0700, David S. Miller wrote: > Date: Tue, 05 Oct 1999 09:10:32 -0400 > From: David Cooley > > It's not possible because the netgear card has a bios/microcode > setup for a PC architecture. The Sun has to have a card that is > designed for the OBP architecture. > >_Please_ don't spread around misinformation like this, it simply isn't >true. > >The issue is that these NetGEAR cards are LiteON Tulip based, and not >supported by the de4x5 driver, but the tulip.c one which I haven't >done the "endianness/64-bit" portability fixes to. > >I use all sorts of Tulip based cards, even quad-tulip Adaptec ones, >all the time in my Ultra/PCI machines. All of them have x86 bios's, >which mean you just can't boot from them under OBP, nothing more. Hmm... Didn't know that... Someone had asked on one of Newsgroups I frequent a while back about using PCI cards from a PC because they were less expensive, and I said to try it, they may work... PCI is PCI. I got blasted by about 6 people with the OBP compliant thing... Other than a SCSI card used for the boot disk or a net card used for booting on a diskless client, would there be any restrictions on using PC based PCI cards of any type? =============================David Cooley N5XMT Internet: N5XMT@bellsouth.net Packet: N5XMT@KQ4LO.#INT.NC.USA.NA T.A.P.R. Member #7068 We are Borg... Prepare to be assimilated! =============================