From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bob Drzyzgula Date: Tue, 05 Oct 1999 15:41:58 +0000 Subject: Re: tulip under linux sparc? Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ultralinux@vger.kernel.org On Tue, Oct 05, 1999 at 11:04:34AM -0400, David Cooley wrote: > > Hmm... Didn't know that... > Someone had asked on one of Newsgroups I frequent a while back about using > PCI cards from a PC because they were less expensive, and I said to try it, > they may work... PCI is PCI. I got blasted by about 6 people with the OBP > compliant thing... Other than a SCSI card used for the boot disk or a net > card used for booting on a diskless client, would there be any restrictions > on using PC based PCI cards of any type? I think that the issue is that, to be functional at boot time, there has to be OBP driver code for the card *either* in the card *or* in the system OBP. Sun's stock OBP has driver code for some basic PCI cards, but it could not be described as "wide support for most cards". Manufacturers that wish to sell in the SPARC/PCI market have the option of writing their own OBP driver and putting it in ROM on the card in a standard manner; in that case the system OBP will find it and can branch to that code at boot time. Adaptec does this with some of their SCSI cards, for example. But once a system is up and running, the ability of an OS to use the card is a function of the OS. It may be the case that Solaris won't use cards that aren't reported by the OBP, but Linux can go ahead and probe for cards that the OBP didn't recognize. (Did I get this right, Dave?) --Bob -- ============================== Bob Drzyzgula It's not a problem bob@drzyzgula.org until something bad happens ============================== http://www.drzyzgula.org/bob/electronics/ ==============================