From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Jones Date: Wed, 06 Oct 1999 14:53:46 +0000 Subject: Re: tulip under linux sparc? Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ultralinux@vger.kernel.org On Tue, 5 Oct 1999, Bob Drzyzgula wrote: > I think that the issue is that, to be functional at boot time, there > has to be OBP driver code for the card *either* in the card *or* in > the system OBP. Sun's stock OBP has driver code for some basic PCI > cards, but it could not be described as "wide support for most cards". > Manufacturers that wish to sell in the SPARC/PCI market have the > option of writing their own OBP driver and putting it in ROM on the > card in a standard manner; in that case the system OBP will find it > and can branch to that code at boot time. Adaptec does this with some > of their SCSI cards, for example. But once a system is up and running, > the ability of an OS to use the card is a function of the OS. It may > be the case that Solaris won't use cards that aren't reported by the > OBP, but Linux can go ahead and probe for cards that the OBP didn't > recognize. (Did I get this right, Dave?) Pretty much, yeah. Most PCI cards should work, With a few minor exceptions, such as _old_ Buslogic scsi boards tend to make my u10 not get _to_ openboot, some cards do some rather obnoxious things with their DMA, like ess Maestro's and a couple of other sound cards i've got. But yeah, there isn't any good reason a vendor can't make a PCI card that works fine on a sparc and an x86 (and an alpha, and a powerpc). OBP support just affects doing things from the firmware, like booting the device. -- Peter "Who's scruffy-looking?" -- Solo