From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ryan Cresawn Date: Wed, 06 Oct 1999 18:08:24 +0000 Subject: SCSI strangeness on Ultra2 Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ultralinux@vger.kernel.org I'm having some trouble on my Ultra2 with the SCSI busses. If I am accessing the ZIP 250 drive on the second SCSI bus then it will really confuse the whole system. Keyboard doesn't take input, programs freeze their operation, X freezes for minutes and then begins to work. If you would like more info let me know. *** output of `uname -a' *** Linux grimlock.larc.nasa.gov 2.2.12 #1 Wed Oct 6 10:06:57 EDT 1999 sparc64 unknown *** trimmed output of `dmesg' *** esp0: IRQ 3,7e0 SCSI ID 7 Clk 40MHz CCF=8 TOut 167 NCR53C9XF(espfast) esp1: IRQ 7,7c3 SCSI ID 7 Clk 25MHz CCF=5 TOut 167 NCR53C90A(esp100a) ESP: Total of 2 ESP hosts found, 2 actually in use. scsi0 : Sparc ESP366-HME scsi1 : Sparc ESP100A (NCR53C90A) scsi : 2 hosts. Vendor: FUJITSU Model: MAB3045S SUN4.2G Rev: 1806 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi0, channel 0, id 1, lun 0 Vendor: FUJITSU Model: MAE3182LC Rev: 0108 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdb at scsi0, channel 0, id 2, lun 0 Vendor: TOSHIBA Model: XM5701TASUN12XCD Rev: 2395 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr0 at scsi0, channel 0, id 6, lun 0 Vendor: IOMEGA Model: ZIP 250 Rev: H.41 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi removable disk sdc at scsi1, channel 0, id 5, lun 0 scsi : detected 1 SCSI cdrom 3 SCSI disks total. esp0: target 6 asynchronous Uniform CDROM driver Revision: 2.55 esp0: target 1 [period 100ns offset 15 20.00MHz FAST-WIDE SCSI-II] SCSI device sda: hdwr sector= 512 bytes. Sectors= 8385121 [4094 MB] [4.1 GB] esp0: target 2 [period 100ns offset 15 20.00MHz FAST-WIDE SCSI-II] SCSI device sdb: hdwr sector= 512 bytes. Sectors= 35700480 [17431 MB] [17.4 GB] scsi : aborting command due to timeout : pid 60, scsi1, channel 0, id 5, lun 0 Read Capacity 00 00 00 00 00 00 00 00 00 esp1: Aborting command esp1: dumping state esp1: dma -- cond_reg<94000010> addr<0e010001> esp1: SW [sreg<06> sstep<01> ireg<10>] esp1: HW reread [sreg<06> sstep ireg<10>] esp1: current command [tgt<05> lun<00> pphase cphase] esp1: disconnected SCSI host 1 abort (pid 60) timed out - resetting SCSI bus is being reset for host 1 channel 0. esp1: Resetting scsi bus esp1: Gross error sreg@ esp1: SCSI bus reset interrupt esp1: illegal command esp1: dumping state esp1: dma -- cond_reg<96000201> addr<0e01000b> esp1: SW [sreg<06> sstep<01> ireg<40>] esp1: HW reread [sreg<93> sstep<84> ireg<18>] esp1: current command [tgt<05> lun<00> pphase cphase] esp1: disconnected esp1: Forcing async and disabling disconnect for target 5 esp1: Resetting scsi bus esp1: SCSI bus reset interrupt esp1: SCSI bus reset interrupt -- Ryan