From mboxrd@z Thu Jan 1 00:00:00 1970 From: Steve Dunham Date: Sun, 10 Oct 1999 05:43:48 +0000 Subject: Re: tulip under linux sparc? Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ultralinux@vger.kernel.org David Cooley writes: > At 02:35 PM 10/5/1999 +1000, nick wrote: > >Anyone, > > > >Is it possible or not to get a Netgear 10/100 card, based on the tulip > >driver, working on a UE10 running Sparc Linux? (redhat 6.0) > It's not possible because the netgear card has a bios/microcode setup for a > PC architecture. The Sun has to have a card that is designed for the OBP > architecture. This not true. I've used both a standard PC 3Com 3c905 network card and a standard PC Adaptec 2940 card in an Ultra 5. It works fine with Linux. (Note that You can't load the kernel from a SCSI disk without the right BIOS, but Linux can use the devices without problem after the kernel is loaded. - In fact the Ultra 5 that I am typing this on is swapping off of a SCSI disk through the standard PC Adaptec controller.) Steve dunham@cse.msu.edu