From: "Sven Köhler" <sven.koehler@gmail.com>
To: linux-ide@vger.kernel.org
Subject: Re: Samsung 840 EVO
Date: Mon, 04 May 2015 18:49:56 +0300 [thread overview]
Message-ID: <mi84f3$vjo$1@ger.gmane.org> (raw)
In-Reply-To: <yq16188tl8v.fsf@sermon.lab.mkp.net>
[-- Attachment #1: Type: text/plain, Size: 369 bytes --]
Am 04.05.2015 um 18:28 schrieb Martin K. Petersen:
> If someone has an 840 Evo with the new firmware it would be helpful for
> us to receive the output of:
>
> # hdparm -I /dev/sdN
> # smartctl -l gplog,0x13 /dev/sdN
Find the output attached. But I'm not sure the smartctl is helpful,
since my machine has been running with discard disabled for about half a
day now.
[-- Attachment #2: hdparm.txt --]
[-- Type: text/plain, Size: 3236 bytes --]
/dev/sda:
ATA device, with non-removable media
Model Number: Samsung SSD 840 EVO 250GB
Serial Number: deleted
Firmware Revision: EXT0DB6Q
Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
Standards:
Used: unknown (minor revision code 0x0039)
Supported: 9 8 7 6 5
Likely used: 9
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 488397168
Logical Sector size: 512 bytes
Physical Sector size: 512 bytes
Logical Sector-0 offset: 0 bytes
device size with M = 1024*1024: 238475 MBytes
device size with M = 1000*1000: 250059 MBytes (250 GB)
cache/buffer size = unknown
Nominal Media Rotation Rate: Solid State Device
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 1 Current = 1
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
SET_MAX security extension
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* 64-bit World wide name
Write-Read-Verify feature set
* WRITE_UNCORRECTABLE_EXT command
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
* Gen1 signaling speed (1.5Gb/s)
* Gen2 signaling speed (3.0Gb/s)
* Gen3 signaling speed (6.0Gb/s)
* Native Command Queueing (NCQ)
* Phy event counters
* unknown 76[15]
* DMA Setup Auto-Activate optimization
Device-initiated interface power management
* Asynchronous notification (eg. media change)
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT LBA Segment Access (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
* reserved 69[4]
* DOWNLOAD MICROCODE DMA command
* SET MAX SETPASSWORD/UNLOCK DMA commands
* WRITE BUFFER DMA command
* READ BUFFER DMA command
* Data Set Management TRIM supported (limit 8 blocks)
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
supported: enhanced erase
2min for SECURITY ERASE UNIT. 8min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 50025388a05456c8
NAA : 5
IEEE OUI : 002538
Unique ID : 8a05456c8
Checksum: correct
[-- Attachment #3: smart.txt --]
[-- Type: text/plain, Size: 2650 bytes --]
smartctl 6.3 2014-07-26 r3976 [x86_64-linux-3.19.6] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
General Purpose Log 0x13 [SATA NCQ Send and Receive log], Page 0-0 (of 1)
0000000: 01 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 |................|
0000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000110: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000120: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000130: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000140: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000150: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000170: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000190: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00001a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00001b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00001c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00001d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00001e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00001f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
next prev parent reply other threads:[~2015-05-04 15:50 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-04 12:38 Samsung 840 EVO Günter Waller
2015-05-04 15:28 ` Martin K. Petersen
2015-05-04 15:49 ` Sven Köhler [this message]
2015-05-04 16:21 ` Martin K. Petersen
2015-05-04 16:27 ` Sven Köhler
2015-05-04 16:35 ` Martin K. Petersen
2015-05-04 16:19 ` Günter Waller
2015-05-04 16:24 ` Martin K. Petersen
2015-05-04 16:37 ` Günter Waller
2015-05-04 16:47 ` Martin K. Petersen
2015-05-04 15:45 ` Sven Köhler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='mi84f3$vjo$1@ger.gmane.org' \
--to=sven.koehler@gmail.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.