From: Christian <cdysthe@gmail.com>
To: linux-btrfs@vger.kernel.org
Subject: Re: Mysterious device (id 0).
Date: Fri, 15 May 2015 13:17:24 -0400 [thread overview]
Message-ID: <mj59n5$5v3$1@ger.gmane.org> (raw)
In-Reply-To: <55562408.9010308@oracle.com>
On 05/15/2015 12:51 PM, Anand Jain wrote:
>
>
> On 05/16/2015 12:37 AM, Christian wrote:
>> On 05/15/2015 12:20 PM, Anand Jain wrote:
>>>
>>>
>>> On 05/15/2015 08:09 AM, Christian wrote:
>>>> Hi,
>>>>
>>>> My laptop has a small ext4 /boot partition /dev/sda1 and a large btrfs
>>>> partition containing / and /home as a sub volume /dev/sda3
>>>>
>>>> When I run scrub on /dev/sda3 and check status with sudo btrfs scrub
>>>> status -d /dev/sda3 I get:
>>>>
>>>> scrub status for 3d52dc93-c89f-453f-965d-8601d11e7710
>>>> scrub device /dev/sda3 (id 1) history
>>>> scrub started at Thu May 14 19:54:02 2015 and finished after 235
>>>> seconds
>>>> total bytes scrubbed: 111.03GiB with 0 errors
>>>> scrub device (id 0) history
>>>> scrub started at Thu May 14 19:54:02 2015 and was aborted after 0
>>>> seconds
>>>> total bytes scrubbed: 0.00B with 0 errors
>>>
>>> we are reading an uninitialized device struct and that uninitialized
>>> devid happens to be 0. looks like num_devices count went haywire.
>>>
>>> in this config was there any device delete ? or a reduce in # of
>>> devices? and has the system been rebooted after that ?
>>>
>>> Thanks, Anand
>>
>> Not sure I understand fully what you are asking, but I deleted a swap
>> partition on the drive a while back and increased the size of the btrfs
>> partition (with gparted). I have rebooted many times since then. That is
>> all the changes I have done to this SSD recently.
>
> ok got it. now do you have any other disk in the system with the same
> fsid ? what does the btrfs fi show -d or blkid show.
>
> Thanks
btrfs fi show -d
Label: none uuid: 3d52dc93-c89f-453f-965d-8601d11e7710
Total devices 1 FS bytes used 108.94GiB
devid 1 size 222.84GiB used 111.03GiB path /dev/sda3
blkid
/dev/sda1: UUID="82348a5a-6c11-47dc-a4aa-884431c7cc1a" TYPE="ext4"
PARTUUID="8e3b64c9-0f7d-4720-be83-8de7a63ec246"
/dev/sda3: UUID="3d52dc93-c89f-453f-965d-8601d11e7710"
UUID_SUB="91c64b93-2eb7-4e98-b940-57a2ae3edd6e" TYPE="btrfs"
PARTUUID="40fcadee-050e-4f5d-8538-6abdfc57c7b8"
It probably doesn't matter but the drive is an INTEL SSD on a Lenovo
Thinkpad X1 Carbon with Ubuntu 15.04
>
>
>> Thanks.
>>>
>>>
>>>> As device (id 0) is indicated, but I have no idea what it is.
>>>>
>>>> When I run scrub with a script (cron) the same device (id 0) shows
>>>> up in
>>>> a warning:
>>>>
>>>> /etc/cron.daily/btrfs-scrub:
>>>> WARNING: device 0 not present
>>>> scrub device /dev/sda3 (id 1) done
>>>> scrub started at Sat May 2 08:03:46 2015 and finished after 241
>>>> seconds
>>>> total bytes scrubbed: 109.06GiB with 0 errors
>>>> scrub device (id 0) canceled
>>>> scrub started at Sat May 2 08:03:46 2015 and was aborted after 0
>>>> seconds
>>>> total bytes scrubbed: 0.00B with 0 errors
>>>>
>>>> What is this device (id 0) which never gets scrubbed but always shows
>>>> up?
>>>>
>>>> I'm running Ubuntu 15.04 with the 3.19.0-16-generic kernel.
>>>>
>>>> P.S. I am not a developer.
>>>>
>>> --
>>
>>
>>
> --
--
//Christian
prev parent reply other threads:[~2015-05-15 17:17 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-15 0:09 Mysterious device (id 0) Christian
2015-05-15 11:25 ` Austin S Hemmelgarn
2015-05-15 15:36 ` Christian
2015-05-15 16:20 ` Anand Jain
2015-05-15 16:37 ` Christian
2015-05-15 16:51 ` Anand Jain
2015-05-15 17:17 ` Christian [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='mj59n5$5v3$1@ger.gmane.org' \
--to=cdysthe@gmail.com \
--cc=linux-btrfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.