From: Andreas Schwab <schwab@suse.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v7 00/15] SiFive FU540 Support
Date: Tue, 12 Feb 2019 11:22:59 +0100 [thread overview]
Message-ID: <mvmzhr1s3uk.fsf@suse.de> (raw)
In-Reply-To: <CAEUhbmVSGvgroNW0YNmS+g=5Ggz8LjnJ4GP2WbY3m9SorG8WsA@mail.gmail.com> (Bin Meng's message of "Tue, 12 Feb 2019 18:12:07 +0800")
On Feb 12 2019, Bin Meng <bmeng.cn@gmail.com> wrote:
> The env var is stored in whatever supported media in U-Boot. Not like
> PCI NICs which normally have EEPROM to store pre-flashed MAC address
> by their vendors, for most embedded network controllers in the SoC,
> normally there is no hardware provided mechanism to ensure a unique
> MAC address, instead it relies on software to program one to the
> hardware before bringing it up.
On the Hifive the MAC is part of the initial DT, so there is no need to
use a secondary store.
Andreas.
--
Andreas Schwab, SUSE Labs, schwab at suse.de
GPG Key fingerprint = 0196 BAD8 1CE9 1970 F4BE 1748 E4D4 88E3 0EEA B9D7
"And now for something completely different."
next prev parent reply other threads:[~2019-02-12 10:22 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-11 5:41 [U-Boot] [PATCH v7 00/15] SiFive FU540 Support Anup Patel
2019-02-11 5:41 ` [U-Boot] [PATCH v7 01/15] riscv: Enable create symlink using kconfig Anup Patel
2019-02-11 7:45 ` Bin Meng
2019-02-11 5:41 ` [U-Boot] [PATCH v7 02/15] riscv: Rename cpu/qemu to cpu/generic Anup Patel
2019-02-11 5:41 ` [U-Boot] [PATCH v7 03/15] riscv: Add asm/dma-mapping.h for DMA mappings Anup Patel
2019-02-11 5:41 ` [U-Boot] [PATCH v7 04/15] riscv: Add place-holder asm/arch/clk.h for driver compilation Anup Patel
2019-02-11 7:47 ` Bin Meng
2019-02-11 5:41 ` [U-Boot] [PATCH v7 05/15] riscv: generic: Ensure that U-Boot runs within 4GB for 64bit systems Anup Patel
2019-02-11 5:41 ` [U-Boot] [PATCH v7 06/15] net: macb: Fix clk API usage for RISC-V systems Anup Patel
2019-02-11 5:42 ` [U-Boot] [PATCH v7 07/15] net: macb: Fix GEM hardware detection Anup Patel
2019-02-11 5:42 ` [U-Boot] [PATCH v7 08/15] clk: Add SiFive FU540 PRCI clock driver Anup Patel
2019-02-11 5:42 ` [U-Boot] [PATCH v7 09/15] clk: Add fixed-factor " Anup Patel
2019-02-11 5:42 ` [U-Boot] [PATCH v7 10/15] drivers: serial_sifive: Fix baud rate calculation Anup Patel
2019-02-11 5:42 ` [U-Boot] [PATCH v7 11/15] drivers: serial_sifive: Skip baudrate config if no input clock Anup Patel
2019-02-11 5:43 ` [U-Boot] [PATCH v7 12/15] cpu: Bind timer driver for boot hart Anup Patel
2019-02-11 5:43 ` [U-Boot] [PATCH v7 13/15] riscv: Add SiFive FU540 board support Anup Patel
2019-02-11 5:43 ` [U-Boot] [PATCH v7 14/15] doc: Add a readme guide for SiFive FU540 Anup Patel
2019-02-13 0:18 ` Kevin Hilman
2019-02-13 1:31 ` Atish Patra
2019-02-13 9:52 ` Auer, Lukas
2019-02-13 19:10 ` Atish Patra
2019-02-13 22:39 ` Kevin Hilman
2019-02-11 5:43 ` [U-Boot] [PATCH v7 15/15] riscv: Enable CONFIG_SYS_BOOT_RAMDISK_HIGH for using initrd Anup Patel
2019-02-11 15:37 ` [U-Boot] [PATCH v7 00/15] SiFive FU540 Support Andreas Schwab
2019-02-12 2:57 ` Anup Patel
2019-02-12 6:22 ` Alexander Graf
2019-02-12 6:35 ` Anup Patel
2019-02-12 7:00 ` Alexander Graf
2019-02-12 8:34 ` Andreas Schwab
2019-02-12 8:35 ` Bin Meng
2019-02-12 9:09 ` Andreas Schwab
2019-02-12 10:12 ` Bin Meng
2019-02-12 10:16 ` Alexander Graf
2019-02-12 10:22 ` Andreas Schwab [this message]
2019-02-13 1:31 ` Bin Meng
2019-02-13 3:51 ` Anup Patel
2019-02-13 9:35 ` Andreas Schwab
2019-02-13 9:46 ` Auer, Lukas
2019-02-13 8:29 ` Alexander Graf
2019-02-13 9:34 ` Andreas Schwab
2019-02-13 23:44 ` Kevin Hilman
2019-02-13 23:58 ` Kevin Hilman
2019-03-11 14:33 ` Bin Meng
2019-03-12 8:55 ` Palmer Dabbelt
2019-04-18 19:14 ` Kevin Hilman
2019-04-18 20:05 ` Atish Patra
2019-04-18 23:16 ` Kevin Hilman
2019-04-19 0:51 ` Atish Patra
2019-04-19 20:38 ` Kevin Hilman
2019-04-19 20:43 ` Kevin Hilman
2019-04-20 2:56 ` Atish Patra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=mvmzhr1s3uk.fsf@suse.de \
--to=schwab@suse.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.