From: Andrew Boyce <andrew@idvector.net>
To: linux-wireless@vger.kernel.org
Subject: Re: wilc1000 staging driver initialization failure
Date: Thu, 4 Feb 2016 13:26:04 -0500 [thread overview]
Message-ID: <n9053t$nmb$1@ger.gmane.org> (raw)
In-Reply-To: <n8u1av$hqv$1@ger.gmane.org>
I've enabled more debugging.
The core of the issue seems to be that wilc_lock_timeout() is for some
reason failing to down_timeout(). I do not currently understand enough
of the internals to understand why.
[ 6852.530000] wilc1000: module is from the staging directory, the
quality is unknown, you have been warned.
[ 6852.570000] wilc1000_sdio: module is from the staging directory, the
quality is unknown, you have been warned.
[ 6852.580000] wilc1000_sdio mmc0:0001:1: Initializing netdev
[ 6852.580000] DBG [wilc_create_wiphy: 2783]Registering wifi device
[ 6852.580000] DBG [WILC_WFI_CfgAlloc: 2747]Allocating wireless device
[ 6852.580000] INFO [wilc_create_wiphy]Max number of PMKIDs = 16
[ 6852.580000] INFO [wilc_create_wiphy]Max scan ids = 10,Max scan IE len
= 1000,Signal Type = 1,Interface Modes = 844,Interface Type = 2
[ 6852.580000] DBG [wilc_create_wiphy: 2822]Successful Registering
[ 6852.580000] DBG [wilc_create_wiphy: 2783]Registering wifi device
[ 6852.580000] DBG [WILC_WFI_CfgAlloc: 2747]Allocating wireless device
[ 6852.580000] INFO [wilc_create_wiphy]Max number of PMKIDs = 16
[ 6852.580000] INFO [wilc_create_wiphy]Max scan ids = 10,Max scan IE len
= 1000,Signal Type = 1,Interface Modes = 844,Interface Type = 2
[ 6852.580000] DBG [wilc_create_wiphy: 2822]Successful Registering
[ 6852.580000] wilc1000_sdio mmc0:0001:1: Driver Initializing success
[ 6856.900000] DBG [wilc_mac_open: 1020]MAC OPEN[cd8c9000]
[ 6856.900000] DBG [wilc_init_host_int: 2835]Host[cd8c9000][cd97cd00]
[ 6856.900000] DBG [wilc_init: 3790]Initializing host interface for client 1
[ 6856.900000] DBG [wilc_init: 3810]Global handle pointer value=cee0f400
[ 6856.900000] DBG [wilc_init: 3824]INIT: CLIENT COUNT 0
[ 6856.900000] INFO [wilc_init]Initialization values, Site survey value: 2
Scan source: 0
Active scan time: 10
Passive scan time: 1200
Current tx Rate = 0
[ 6856.900000] DBG [wilc_mac_open: 1029]*** re-init ***
[ 6856.900000] DBG [wlan_init_locks: 809]Initializing Locks ...
[ 6856.900000] DBG [wilc_wlan_init: 1593]Initializing WILC_Wlan ...
[ 6856.900000] ERR [wilc1000_wlan_init: 900]Initializing WILC_Wlan FAILED
[ 6856.900000] ERR [wilc1000_wlan_init: 900]Initializing WILC_Wlan FAILED
[ 6856.900000] DBG [wlan_deinit_locks: 835]De-Initializing Locks
[ 6856.900000] ERR [wilc1000_wlan_init: 983]WLAN Iinitialization FAILED
[ 6856.900000] ERR [wilc1000_wlan_init: 983]WLAN Iinitialization FAILED
[ 6856.900000] ERR [wilc_mac_open: 1032]Failed to initialize wilc1000
[ 6856.900000] ERR [wilc_mac_open: 1032]Failed to initialize wilc1000
[ 6856.900000] DBG [wilc_deinit: 3896]De-initializing host interface for
client 1
[ 6856.900000] DBG [wilc_deinit: 3905]>> Connect timer is active
[ 6856.900000] DBG [wilc_send_config_pkt: 619]Sending config SET PACKET
WID:2085
[ 6856.900000] Sending config SET PACKET WID:2085
[ 6856.900000] Sending config SET PACKET val:
[ 6856.900000] DBG [wilc_wlan_cfg_set: 1443][WILC]PACKET Commit with
sequence number 0
[ 6856.900000] [WILC]PACKET Commit with sequence number 0
[ 6856.900000] DBG [wilc_wlan_cfg_set: 1446]Processing cfg_set()
[ 6856.900000] Processing cfg_set()
[ 6856.900000] DBG [wilc_wlan_txq_add_cfg_pkt: 368]Adding config packet ...
[ 6856.900000] DBG [wilc_wlan_txq_add_cfg_pkt: 389]Adding the config
packet at the Queue tail
[ 6856.900000] DBG [wilc_lock_timeout: 257]Locking cd9eb82c
[ 6856.900000] Locking cd9eb82c
[ 6856.900000] timeout 2000
[ 6856.900000] Failed, mutex is NULL
[ 6856.900000] DBG [wilc_wlan_txq_add_to_head: 150]Number of entries in
TxQ = 1
[ 6856.900000] DBG [wilc_wlan_txq_add_to_head: 155]Wake up the txq_handler
[ 6856.900000] DBG [wilc_lock_timeout: 257]Locking cd9eb850
[ 6856.900000] Locking cd9eb850
[ 6856.900000] timeout 2000
[ 6858.900000] Failed, mutex is NULL
[ 6858.900000] DBG [hostIFthread: 2793]THREAD: Exiting HostIfThread
[ 6858.900000] DBG [hostIFthread: 2989]Releasing thread exit semaphore
[ 6858.900000] INFO [clear_shadow_scan]destroy aging timer
[ 6858.900000] DBG [wilc_deinit_host_int: 2878]destroy during ip
Any help would be appreciated.
Thanks!
-Andrew
On 2/3/16 6:09 PM, Andrew Boyce wrote:
> I've been working to build and test the staging wilc1000-sdio driver and
> have run into a problem.
>
> I've built a kernel from Greg KH's staging-testing branch and loaded it
> onto our device. When I try to bring the interface up, I get the following:
>
> root@test:~# ifconfig wlan0 up
> kernel: [ 3510.400000] DBG [wilc_mac_open: 1014]MAC OPEN[cef20000]
> kernel: [ 3510.400000] DBG [wilc_init_host_int:
> 2835]Host[cef20000][cd0df1c0]
> kernel: [ 3510.400000] DBG [wilc_mac_open: 1023]*** re-init ***
> kernel: [ 3510.400000] DBG [wlan_init_locks: 803]Initializing Locks ...
> kernel: [ 3510.400000] DBG [wilc_wlan_init: 1589]Initializing WILC_Wlan ...
> kernel: [ 3510.400000] DBG [wlan_deinit_locks: 829]De-Initializing Locks
> SIOCSIFFLAGS: Input/output error
> kernel: [ 3512.400000] [Sendconfigpkt]Set Timed out
> kernel: [ 3512.400000] DBG [hostIFthread: 2793]THREAD: Exiting HostIfThread
>
> Any ideas?
>
> I understand that this driver is under active development. Hopefully I
> can get some of the bugs resolved.
>
> Thanks!
> --Andrew
>
> P.S. I apologize if this is the wrong forum for this type of bug report.
>
> --
> To unsubscribe from this list: send the line "unsubscribe
> linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
next prev parent reply other threads:[~2016-02-04 18:26 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-03 23:09 wilc1000 staging driver initialization failure Andrew Boyce
2016-02-04 18:26 ` Andrew Boyce [this message]
2016-02-10 17:44 ` Fwd: " Andrew Boyce
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='n9053t$nmb$1@ger.gmane.org' \
--to=andrew@idvector.net \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.