Re: basic verify - output shows start with read then write?

[Slow bucks <frankwhitebe@gmail.com>]

The fio status clearly shows the correct order during the run:

Phase#1 write:
Jobs: 1 (f=1): [w(1)] [1.7% done] [0KB/40408KB/0KB /s] [0/1039/0 iops] 
[eta 08m:42s]

Phase#2 read/verify
Jobs: 1 (f=1): [V(1)] [51.2% done] [54217KB/0KB/0KB /s] [1052/0/0 iops] 
[eta 03m:46s]

My confusion was more on how the output file should report...ie write 
then read but instead its show read then write.

On 2017-02-14 04:16:29 +0000, Slow bucks said:

> Strange but during a verify job the output shows that it executed the 
> verify/read operation first then write:
> 
> randw/verify: (groupid=0, jobs=1): err= 0: pid=1647: Tue Feb 14 04:08:08 2017
>   read : io=10240MB, bw=64801KB/s, iops=63, runt=161816msec
>     slat (usec): min=48, max=16277, avg=423.53, stdev=2263.87
>     clat (msec): min=18, max=860, avg=488.46, stdev=34.60
>      lat (msec): min=18, max=860, avg=488.88, stdev=34.65
>     clat percentiles (msec):
>      |  1.00th=[  461],  5.00th=[  461], 10.00th=[  465], 20.00th=[  478],
>      | 30.00th=[  482], 40.00th=[  482], 50.00th=[  482], 60.00th=[  482],
>      | 70.00th=[  498], 80.00th=[  498], 90.00th=[  498], 95.00th=[  519],
>      | 99.00th=[  619], 99.50th=[  701], 99.90th=[  783], 99.95th=[  824],
>      | 99.99th=[  840]
>   write: io=10240MB, bw=54791KB/s, iops=53, runt=191378msec
>     slat (usec): min=29, max=16341, avg=548.59, stdev=2596.46
>     clat (msec): min=17, max=1238, avg=578.37, stdev=61.50
>      lat (msec): min=17, max=1239, avg=578.92, stdev=61.52
>     clat percentiles (msec):
>      |  1.00th=[  478],  5.00th=[  502], 10.00th=[  519], 20.00th=[  523],
>      | 30.00th=[  537], 40.00th=[  603], 50.00th=[  603], 60.00th=[  603],
>      | 70.00th=[  603], 80.00th=[  619], 90.00th=[  619], 95.00th=[  627],
>      | 99.00th=[  742], 99.50th=[  873], 99.90th=[ 1057], 99.95th=[ 1106],
>      | 99.99th=[ 1237]
>     bw (KB  /s): min= 1549, max=69493, per=99.92%, avg=54747.92, stdev=5798.57
>     lat (msec) : 20=0.01%, 50=0.01%, 100=0.05%, 250=0.12%, 500=48.41%
>     lat (msec) : 750=50.80%, 1000=0.48%, 2000=0.11%
> 
> I used the example from here:
> 
> https://github.com/axboe/fio/blob/master/examples/basic-verify.fio
> 
> Isn't the results suppose to show the write activity first then the 
> verify/read?