All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Thomas Maier" <balagi@justmail.de>
To: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Cc: "Peter Osterlund" <petero2@telia.com>, "akpm@osdl.org" <akpm@osdl.org>
Subject: [PATCH 2/2] 2.6.19-rc1-mm1 pktcdvd: bio write congestion
Date: Sat, 14 Oct 2006 20:03:58 +0200	[thread overview]
Message-ID: <op.thfa4wnqiudtyh@master> (raw)

[-- Attachment #1: Type: text/plain, Size: 228 bytes --]

Hello,

this adds a bio write queue congestion control
to the pktcdvd driver with fixed on/off marks.
It prevents that the driver consumes a unlimited
amount of write requests.

Signed-off-by: Thomas Maier <balagi@justmail.de>


[-- Attachment #2: pktcdvd-2-wqueue-congestion.patch --]
[-- Type: application/octet-stream, Size: 4111 bytes --]

diff -urpN 1-init-pktdev_major/drivers/block/pktcdvd.c 2-wqueue-congestion/drivers/block/pktcdvd.c
--- 1-init-pktdev_major/drivers/block/pktcdvd.c	2006-10-14 13:50:54.000000000 +0200
+++ 2-wqueue-congestion/drivers/block/pktcdvd.c	2006-10-14 14:05:28.000000000 +0200
@@ -84,6 +84,8 @@
 static struct pktcdvd_device *pkt_devs[MAX_WRITERS];
 static struct proc_dir_entry *pkt_proc;
 static int pktdev_major = 0;
+static int write_congestion_on  = PKT_WRITE_CONGESTION_ON;
+static int write_congestion_off = PKT_WRITE_CONGESTION_OFF;
 static struct mutex ctl_mutex;	/* Serialize open/close/setup/teardown */
 static mempool_t *psd_pool;
 
@@ -894,6 +896,7 @@ static int pkt_handle_queue(struct pktcd
 	sector_t zone = 0; /* Suppress gcc warning */
 	struct pkt_rb_node *node, *first_node;
 	struct rb_node *n;
+	int wakeup;
 
 	VPRINTK("handle_queue\n");
 
@@ -966,7 +969,14 @@ try_next_bio:
 		pkt->write_size += bio->bi_size / CD_FRAMESIZE;
 		spin_unlock(&pkt->lock);
 	}
+	/* check write congestion marks, and if bio_queue_size is
+	   below, wake up any waiters */
+	wakeup = (pd->write_congestion_on > 0
+	 		&& pd->bio_queue_size <= pd->write_congestion_off
+			&& waitqueue_active(&pd->write_congestion_wqueue));
 	spin_unlock(&pd->lock);
+	if (wakeup)
+		wake_up(&pd->write_congestion_wqueue);
 
 	pkt->sleep_time = max(PACKET_WAIT_TIME, 1);
 	pkt_set_state(pkt, PACKET_WAITING_STATE);
@@ -2180,6 +2190,31 @@ static int pkt_make_request(request_queu
 	spin_unlock(&pd->cdrw.active_list_lock);
 
 	/*
+	 * Test if there is enough room left in the bio work queue
+	 * (queue size >= congestion on mark).
+	 * If not, wait till the work queue size is below the congestion off mark.
+	 * This is similar to the get_request_wait() call made in the block
+	 * layer function __make_request() used for normal block i/o request
+	 * handling.
+	 */
+	spin_lock(&pd->lock);
+	if (pd->write_congestion_on > 0
+	     && pd->bio_queue_size >= pd->write_congestion_on) {
+		DEFINE_WAIT(wait);
+		do { /* wait till number of bio requests is low enough */
+			spin_unlock(&pd->lock);
+			prepare_to_wait_exclusive(&pd->write_congestion_wqueue,
+					&wait, TASK_UNINTERRUPTIBLE);
+			io_schedule();
+			/* if we are here, bio_queue_size should be below
+			   congestion_off, but be sure and do a test */
+			spin_lock(&pd->lock);
+		} while(pd->bio_queue_size > pd->write_congestion_off);
+		finish_wait(&pd->write_congestion_wqueue, &wait);
+	}
+	spin_unlock(&pd->lock);
+
+	/*
 	 * No matching packet found. Store the bio in the work queue.
 	 */
 	node = mempool_alloc(pd->rb_pool, GFP_NOIO);
@@ -2298,6 +2333,9 @@ static int pkt_seq_show(struct seq_file 
 	seq_printf(m, "\tstate:\t\t\ti:%d ow:%d rw:%d ww:%d rec:%d fin:%d\n",
 		   states[0], states[1], states[2], states[3], states[4], states[5]);
 
+	seq_printf(m, "\twrite congestion marks:\toff=%d on=%d\n",
+			pd->write_congestion_off,
+			pd->write_congestion_on);
 	return 0;
 }
 
@@ -2474,6 +2512,10 @@ static int pkt_setup_dev(dev_t dev, dev_
 	init_waitqueue_head(&pd->wqueue);
 	pd->bio_queue = RB_ROOT;
 
+	init_waitqueue_head(&pd->write_congestion_wqueue);
+	pd->write_congestion_on  = write_congestion_on;
+	pd->write_congestion_off = write_congestion_off;
+
 	disk = alloc_disk(1);
 	if (!disk)
 		goto out_mem;
diff -urpN 1-init-pktdev_major/include/linux/pktcdvd.h 2-wqueue-congestion/include/linux/pktcdvd.h
--- 1-init-pktdev_major/include/linux/pktcdvd.h	2006-10-14 13:49:52.000000000 +0200
+++ 2-wqueue-congestion/include/linux/pktcdvd.h	2006-10-14 13:58:16.000000000 +0200
@@ -112,6 +112,12 @@ struct pkt_ctrl_command {
 #include <linux/completion.h>
 #include <linux/cdrom.h>
 
+
+/* default bio write queue congestion marks */
+#define PKT_WRITE_CONGESTION_ON    10000
+#define PKT_WRITE_CONGESTION_OFF   9000
+
+
 struct packet_settings
 {
 	__u32			size;		/* packet size in (512 byte) sectors */
@@ -271,6 +277,10 @@ struct pktcdvd_device
 
 	struct packet_iosched   iosched;
 	struct gendisk		*disk;
+
+	wait_queue_head_t	write_congestion_wqueue;
+	int			write_congestion_off;
+	int			write_congestion_on;
 };
 
 #endif /* __KERNEL__ */

             reply	other threads:[~2006-10-14 18:02 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-10-14 18:03 Thomas Maier [this message]
2006-10-14 18:55 ` [PATCH 2/2] 2.6.19-rc1-mm1 pktcdvd: bio write congestion Peter Osterlund
2006-10-15 18:16   ` Jens Axboe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=op.thfa4wnqiudtyh@master \
    --to=balagi@justmail.de \
    --cc=akpm@osdl.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=petero2@telia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.