From: "Rafał Miłecki" <zajec5@gmail.com>
To: "linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>,
"John W. Linville" <linville@tuxdriver.com>
Cc: "bcm43xx-dev@lists.berlios.de" <bcm43xx-dev@lists.berlios.de>
Subject: [PATCH 4/4] b43: N-PHY: implement and add multi-dimensional table reading
Date: Sun, 17 Jan 2010 23:38:07 +0100 [thread overview]
Message-ID: <op.u6o7ttpo9lhzdc@linux-g0th.site> (raw)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
drivers/net/wireless/b43/phy_n.c | 30 ++++++++++-----------------
drivers/net/wireless/b43/tables_nphy.c | 35 ++++++++++++++++++++++++++++++++
drivers/net/wireless/b43/tables_nphy.h | 2 +
3 files changed, 48 insertions(+), 19 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 298a30a..abd99a0 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -829,8 +829,7 @@ static void b43_nphy_tx_pwr_ctrl_coef_setup(struct b43_wldev *dev)
if (nphy->hang_avoid)
b43_nphy_stay_in_carrier_search(dev, true);
- /* TODO: Read an N PHY Table with ID 15, length 7, offset 80,
- width 16, and data pointer buffer */
+ b43_ntab_read_bulk(dev, B43_NTAB16(15, 80), 7, buffer);
for (i = 0; i < 2; i++) {
tmp = ((buffer[i * 2] & 0x3FF) << 10) |
@@ -1507,8 +1506,7 @@ static struct nphy_txgains b43_nphy_get_tx_gains(struct b43_wldev *dev)
if (nphy->hang_avoid)
b43_nphy_stay_in_carrier_search(dev, true);
- /* TODO: Read an N PHY Table with ID 7, length 2,
- offset 0x110, width 16, and curr_gain */
+ b43_ntab_read_bulk(dev, B43_NTAB16(7, 0x110), 2, curr_gain);
if (nphy->hang_avoid)
b43_nphy_stay_in_carrier_search(dev, false);
@@ -1767,8 +1765,7 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
nphy->hang_avoid = 0;
}
- /* TODO: Read an N PHY Table with ID 7, length 2, offset 0x110,
- width 16, and data pointer save */
+ b43_ntab_read_bulk(dev, B43_NTAB16(7, 0x110), 2, save);
for (i = 0; i < 2; i++) {
b43_nphy_iq_cal_gain_params(dev, i, target, ¶ms[i]);
@@ -1889,9 +1886,8 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
udelay(10);
}
- /* TODO: Read an N PHY Table with ID 15,
- length table_length, offset 96, width 16,
- and data pointer buffer */
+ b43_ntab_read_bulk(dev, B43_NTAB16(15, 96), length,
+ buffer);
b43_ntab_write_bulk(dev, B43_NTAB16(15, 64), length,
buffer);
@@ -1906,8 +1902,7 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
if (!mphase || nphy->mphase_cal_phase_id == last) {
b43_ntab_write_bulk(dev, B43_NTAB16(15, 96), 4, buffer);
- /* TODO: Read an N PHY Table with ID 15, length 4,
- offset 80, width 16, and data pointer buffer */
+ b43_ntab_read_bulk(dev, B43_NTAB16(15, 80), 4, buffer);
if (dev->phy.rev < 3) {
buffer[0] = 0;
buffer[1] = 0;
@@ -1925,9 +1920,8 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
length = 11;
if (dev->phy.rev < 3)
length -= 2;
- /* TODO: Read an N PHY Table with ID 15, length length,
- offset 96, width 16, and data pointer
- nphy->txiqlocal_bestc */
+ b43_ntab_read_bulk(dev, B43_NTAB16(15, 96), length,
+ nphy->txiqlocal_bestc);
nphy->txiqlocal_coeffsvalid = true;
/* TODO: Set nphy->txiqlocal_chanspec to
the current channel */
@@ -1935,9 +1929,8 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
length = 11;
if (dev->phy.rev < 3)
length -= 2;
- /* TODO: Read an N PHY Table with ID 5, length length,
- offset 96, width 16, and data pointer
- nphy->mphase_txcal_bestcoeffs */
+ b43_ntab_read_bulk(dev, B43_NTAB16(15, 96), length,
+ nphy->mphase_txcal_bestcoeffs);
}
b43_nphy_stop_playback(dev);
@@ -1989,8 +1982,7 @@ static int b43_nphy_rev2_cal_rx_iq(struct b43_wldev *dev,
if (dev->phy.rev < 2)
;/* TODO: Call N PHY Reapply TX Cal Coeffs */
- /* TODO: Read an N PHY Table with ID 7, length 2, offset 0x110,
- width 16, and data gain_save */
+ b43_ntab_read_bulk(dev, B43_NTAB16(7, 0x110), 2, gain_save);
for (i = 0; i < 2; i++) {
b43_nphy_iq_cal_gain_params(dev, i, target, &cal_params[i]);
cal_gain[i] = cal_params[i].cal_gain;
diff --git a/drivers/net/wireless/b43/tables_nphy.c b/drivers/net/wireless/b43/tables_nphy.c
index b8aed45..b8c9fc6 100644
--- a/drivers/net/wireless/b43/tables_nphy.c
+++ b/drivers/net/wireless/b43/tables_nphy.c
@@ -2950,6 +2950,41 @@ u32 b43_ntab_read(struct b43_wldev *dev, u32 offset)
return value;
}
+void b43_ntab_read_bulk(struct b43_wldev *dev, u32 offset,
+ unsigned int nr_elements, void *_data)
+{
+ u32 type;
+ u8 *data = _data;
+ unsigned int i;
+
+ type = offset & B43_NTAB_TYPEMASK;
+ offset &= ~B43_NTAB_TYPEMASK;
+ B43_WARN_ON(offset > 0xFFFF);
+
+ b43_phy_write(dev, B43_NPHY_TABLE_ADDR, offset);
+
+ for (i = 0; i < nr_elements; i++) {
+ switch (type) {
+ case B43_NTAB_8BIT:
+ *data = b43_phy_read(dev, B43_NPHY_TABLE_DATALO) & 0xFF;
+ data++;
+ break;
+ case B43_NTAB_16BIT:
+ *((u16 *)data) = b43_phy_read(dev, B43_NPHY_TABLE_DATALO);
+ data += 2;
+ break;
+ case B43_NTAB_32BIT:
+ *((u32 *)data) = b43_phy_read(dev, B43_NPHY_TABLE_DATAHI);
+ *((u32 *)data) <<= 16;
+ *((u32 *)data) |= b43_phy_read(dev, B43_NPHY_TABLE_DATALO);
+ data += 4;
+ break;
+ default:
+ B43_WARN_ON(1);
+ }
+ }
+}
+
void b43_ntab_write(struct b43_wldev *dev, u32 offset, u32 value)
{
u32 type;
diff --git a/drivers/net/wireless/b43/tables_nphy.h b/drivers/net/wireless/b43/tables_nphy.h
index 64e990a..6bbef89 100644
--- a/drivers/net/wireless/b43/tables_nphy.h
+++ b/drivers/net/wireless/b43/tables_nphy.h
@@ -143,6 +143,8 @@ b43_nphy_get_chantabent(struct b43_wldev *dev, u8 channel);
#define B43_NTAB_TX_IQLO_CAL_CMDS_FULLCAL_REV3 12
u32 b43_ntab_read(struct b43_wldev *dev, u32 offset);
+void b43_ntab_read_bulk(struct b43_wldev *dev, u32 offset,
+ unsigned int nr_elements, void *_data);
void b43_ntab_write(struct b43_wldev *dev, u32 offset, u32 value);
void b43_ntab_write_bulk(struct b43_wldev *dev, u32 offset,
unsigned int nr_elements, const void *_data);
--
1.6.4.2
reply other threads:[~2010-01-17 22:38 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=op.u6o7ttpo9lhzdc@linux-g0th.site \
--to=zajec5@gmail.com \
--cc=bcm43xx-dev@lists.berlios.de \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.