All of lore.kernel.org
 help / color / mirror / Atom feed
From: Karsten Mehrhoff <kawime@gmx.de>
To: "Michel Dänzer" <michel@daenzer.net>
Cc: "Jerome Glisse" <glisse@freedesktop.org>,
	"Shaohua Li" <shaohua.li@intel.com>,
	"Dave Airlie" <airlied@linux.ie>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"Andrew Morton" <akpm@linux-foundation.org>,
	"dri-devel@lists.sourceforge.net"
	<dri-devel@lists.sourceforge.net>,
	"stable@kernel.org" <stable@kernel.org>
Subject: Re: PROBLEM: 2.6.29.2 - AGP doesn't work anymore on my nforce2
Date: Mon, 04 May 2009 18:23:03 +0200	[thread overview]
Message-ID: <op.uteygpgpgp7xae@127.0.0.1> (raw)
In-Reply-To: <1241449660.24202.1041.camel@thor.local>

On Mon, 04 May 2009 17:07:40 +0200, Michel Dänzer wrote:
> On Mon, 2009-05-04 at 08:31 +0200, Karsten Mehrhoff wrote:
>> On Mon, 04 May 2009 03:41:51 +0200, Shaohua Li wrote:
>>> On Fri, May 01, 2009 at 09:22:19PM +0800, kawime@gmx.de wrote:
>>>>> On Thu, 2009-04-30 at 17:59 -0700, Andrew Morton wrote:
>>>>>> On Thu, 30 Apr 2009 10:51:47 +0200
>>>>>> Karsten Mehrhoff wrote:
>>>>>>
>>>>>>> [1.]
>>>>>>> PROBLEM: No more agp card functionality with the patch 2.6.29.2 of
>>>>>> 'a/drivers/char/agp/generic.c'
>>>>>>>
>>>>>>> [2.]
>>>>>>> I compiled the kernel 2.6.29.2 with my .config of 2.6.29.1 and run
>>>>>> into problems with the speed of my ATI RADEON 9600 (rv350)
>>>>>>>
>>>>>>
>>>>>
>>>>> Is your problem speed issue ? ie just a slowdown ? Or does AGP stop
>>>>> working with this patch ? Slowdown is expected from this patch but
>>>>> it should hurt too much.
>>>>>
>>>>
>>>>                        2.6.29.1  | 2.6.29.2
>>>>                         --------  |  --------
>>>> glxgears             ~ 2900 FPS  |  ~ 75 FPS
>>>> glxgears -fullscreen ~  500 FPS  |  ~ 11 FPS
>>> Does this patch alone give so huge slowdown? From my little knowledge,
>>> xserver
>>> does agp pages allocation only at startup.
>>
>> I only reverted this patch in the source file  
>> (/drivers/char/agp/generic.c) and got back my old speed on 2.6.29.2.
>
> Is the DRI enabled in both cases? Compare the Xorg.0.log file and the
> output of
>
> dmesg|grep -e agp -e drm
>


*********************************
2.6.29.2 (original) 
*********************************

$ dmesg|grep -e agp -e drm
$ dmesg|grep agp
[    0.861997] Linux agpgart interface v0.103
[   10.893793] agpgart: Detected NVIDIA nForce2 chipset
[   10.939070] agpgart-nvidia 0000:00:00.0: AGP aperture is 64M @ 0xe0000000


$ glxinfo | grep direct
direct rendering: Yes


$ grep -i dri /var/log/Xorg.0.log
	X.Org Video Driver: 5.0
	X.Org XInput driver : 4.0
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
(II) Loading extension DRI2
(II) Scanning /usr/share/xserver-xorg/pci directory for additional PCI ID's supported by the drivers
(==) Matched radeon for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) RADEON: Driver for ATI Radeon chipsets:
	ABI class: X.Org Video Driver, version 5.0
	ABI class: X.Org Video Driver, version 5.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
	ABI class: X.Org Video Driver, version 5.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
(EE) RADEON(0): [agp] AGP failed to initialize. Disabling the DRI.
	ABI class: X.Org Video Driver, version 5.0
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0



**********************************
2.6.29.2 (with the reverted patch)
**********************************

$ dmesg|grep -e agp -e drm
[    0.870790] Linux agpgart interface v0.103
[    0.871479] agpgart: Detected NVIDIA nForce2 chipset
[    0.877279] agpgart-nvidia 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
[    0.878450] [drm] Initialized drm 1.1.0 20060810
[    0.881925] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[   33.336636] agpgart-nvidia 0000:00:00.0: AGP 3.0 bridge
[   33.336658] agpgart-nvidia 0000:00:00.0: putting AGP V3 device into 8x mode
[   33.575910] [drm] Setting GART location based on new memory map
[   33.575922] [drm] Loading R300 Microcode
[   33.575965] [drm] Num pipes: 1
[   33.575973] [drm] writeback test succeeded in 1 usecs


$ glxinfo | grep direct
direct rendering: Yes


$ grep -i dri /var/log/Xorg.0.log
	X.Org Video Driver: 5.0
	X.Org XInput driver : 4.0
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
(II) Loading extension DRI2
(II) Scanning /usr/share/xserver-xorg/pci directory for additional PCI ID's supported by the drivers
(==) Matched radeon for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) RADEON: Driver for ATI Radeon chipsets:
	ABI class: X.Org Video Driver, version 5.0
	ABI class: X.Org Video Driver, version 5.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
	ABI class: X.Org Video Driver, version 5.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): [DRI] installation complete
(WW) RADEON(0): DRI init changed memory map, adjusting ...
	ABI class: X.Org Video Driver, version 5.0
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0


For me it seems that agp failed to initialize because of the patch.

  reply	other threads:[~2009-05-04 16:23 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-04-30  8:51 PROBLEM: 2.6.29.2 - AGP doesn't work anymore on my nforce2 Karsten Mehrhoff
2009-05-01  0:59 ` Andrew Morton
2009-05-01 12:08   ` Jerome Glisse
     [not found]     ` <55bc079c-5c3d-465a-be28-0e38c0b48b14@rrsmsx603.amr.corp.intel.com>
2009-05-04  1:41       ` Shaohua Li
2009-05-04  6:31         ` Karsten Mehrhoff
2009-05-04 15:07           ` Michel Dänzer
2009-05-04 16:23             ` Karsten Mehrhoff [this message]
2009-05-04 16:40               ` Michel Dänzer
2009-05-16 23:44                 ` Andrew Morton
2009-05-18  1:50                   ` Shaohua Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=op.uteygpgpgp7xae@127.0.0.1 \
    --to=kawime@gmx.de \
    --cc=airlied@linux.ie \
    --cc=akpm@linux-foundation.org \
    --cc=dri-devel@lists.sourceforge.net \
    --cc=glisse@freedesktop.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michel@daenzer.net \
    --cc=shaohua.li@intel.com \
    --cc=stable@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.