From: "Petr Cvek" <petr.cvek@tul.cz>
To: grant.likely@secretlab.ca
Cc: linux-kernel@vger.kernel.org
Subject: [RFC][PATCH][TRIVIAL] System ACE fails in look for root devices
Date: Thu, 13 Oct 2011 13:02:42 +0200 [thread overview]
Message-ID: <op.v3aeassn4x40tt@localhost> (raw)
Hello,
I sent this mail some time ago, but nobody replied :-(.
I'm using microblaze linux on ML506 board and I found problem with
SystemACE CF driver.
When xsysace driver is probed, and dts file does not include entry
"port-number" (existence of line not actually tested) on line:
of_property_read_u32(dev->dev.of_node, "port-number", &id);
kernel fails to boot with this message:
<4>VFS: Cannot open root device "xsa2" or unknown-block(0,0)
<4>Please append a correct "root=" boot option; here are the available
partitions:
<4>fff:ffff0 990864 xs` (driver?)
<4> fff:ffff1 124960 xs`1 00000000-0000-0000-0000-000000000000
<4> fff:ffff2 865872 xs`2 00000000-0000-0000-0000-000000000000
<0>Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(0,0)
(note xs` xs`1 xs`2 partition names)
So I've done some searching and found "ace->id" variable, which has value
"-1". Because this value define letter of drive and is incremented by 'a',
then with its value of -1, creates letter before 'a' thus '`'.
"ace->id" value is assigned in ace_probe function on line
of_property_read_u32(dev->dev.of_node, "port-number", &id);
if (id < 0)
id = 0;
This condition should prevents value to be less than zero, but is does
not. It's because type, which is u32 few lines before, condition is never
true. So I suggest changing it to int. Actually, there was patch some
time ago, which has changed it into u32 (last patch for xsysace.c).
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commitdiff;h=5d10302f46df1d9a85c34ea97f9b6c29e414482e
And finally here is my patch, which suggests changing this line back:
Test for signed value is never true, because of unsigned type.
From: Petr Cvek <petr.cvek@tul.cz>
Signed-off-by: Petr Cvek <petr.cvek@tul.cz>
---
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index fb1975d..3ed920c 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -1155,7 +1155,7 @@ static int __devinit ace_probe(struct
platform_device *dev)
{
resource_size_t physaddr = 0;
int bus_width = ACE_BUS_WIDTH_16; /* FIXME: should not be hard
coded */
- u32 id = dev->id;
+ int id = dev->id;
int irq = NO_IRQ;
int i;
next reply other threads:[~2011-10-13 11:02 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-13 11:02 Petr Cvek [this message]
2011-10-13 17:29 ` [RFC][PATCH][TRIVIAL] System ACE fails in look for root devices Grant Likely
2011-10-17 14:49 ` Petr Cvek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=op.v3aeassn4x40tt@localhost \
--to=petr.cvek@tul.cz \
--cc=grant.likely@secretlab.ca \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.