From mboxrd@z Thu Jan 1 00:00:00 1970 From: Emil Velikov Subject: Re: nouveau Ignoring invalid EDID block 1 Date: Wed, 15 Jun 2011 14:44:46 +0100 Message-ID: References: <4DF88862.9030609@free.fr> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; Format="flowed"; DelSp="yes" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <4DF88862.9030609-GANU6spQydw@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: nouveau-bounces+gcfxn-nouveau=m.gmane.org-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org Errors-To: nouveau-bounces+gcfxn-nouveau=m.gmane.org-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org, zaverel List-Id: nouveau.vger.kernel.org So let see if I got this correct Desktop card with 2 monitors connected to it 1 - Default monitor connected via DVI 2 - Second monitor (TV actually), via VGA Even though xrandr reports display 2 to have resolution set to 1280x720 50hz, the display itself reports 1202x670 50hz When you say linux-2.6.36-gentoo-r6, can you please state the commit (or tag) it is based on Before you were able to set the resolution of the TV, but now you cannot - any messages? (either on TV or logs) Was the TV being detected correctly before - same resolution via xrandr and tv info? Was the connection of the TV incorrectly being detected before - VGA .. DVI? Whereas for the "ERROR Raw EDID..." message my guess is that the TV does not manage to provide the data fast enough or the connection (cable/connectors) are not in good working order Can you provide is the same logs but for the working kernel Cheers On Wed, 15 Jun 2011 11:24:34 +0100, zaverel wrote: > Hello , > > All is fine except i can't change resolution on my second monitor vga > ,tv in fact, > (reported as DVI-I-2 ) anymore with my 9400gt. > > > > Now , i'm on : > > linux-2.6.39-gentoo-r1 > xorg-server-1.10.2 > xf86-video-nouveau-0.0.16_pre20110323 > libdrm-2.4.25 > > Errors in dmesg are: > > nouveau 0000:02:00.0: DVI-I-2: Ignoring invalid EDID block 1. > [drm:drm_edid_block_valid] *ERROR* Raw EDID: > <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ > <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ > <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ > <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ > <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ > <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ > <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ > <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ > > > > > whatever i valid with xrandr is not really do on my tv > although xrandr say it's good , my tv always report 1202x670 50hz > > I tried with and without xorg.conf > > My last kernel working is linux-2.6.36-gentoo-r6. > > see you. > > > > >